Digital Operator Functions6-155Setting PrecautionsConstant A1-05 cannot be displayed using normal key operations. To display A1-05, hold down the RESETKey and press the MENU Key while A1-04 is displayed. Displaying User-set Constants OnlyYou can set and refer to constants necessary to the Inverter only, using the A2 constants (user-set constants)and A1-01 (Constants Access Level).Set the number of the constant to which you want to refer in A2-01 to A2-32, and then set A1-01 to 1. You canset and refer to constants set in A1-01 to A1-03 and A2-01 to A2-32 only, using advanced programming mode.Related ConstantsA1-04 PasswordPassword input when a pass-word has been set in A1-05.This function write-protectssome constants of the initializemode.If the password is changed, A1-01 to A1-03 and A2-01 to A2-32constants can no longer bechanged. (Programming modeconstants can be changed.)0 to9999 0 No A A A A 104HA1-05 Password set-tingUsed to set a four digit numberas the password.This constant is not usually dis-played. When the Password(A1-04) is displayed, hold downthe RESET Key and press theMenu Key and the passwordwill be displayed.0 to9999 0 No A A A A 105HCon-stantNumberName Description SettingRangeFactorySettingChangeduringOpera-tionControl Methods MEMOBUSRegis-terV/fV/fwithPGOpenLoopVec-torFluxVec-torA2-01toA2-32User settingconstantsUsed to set the constant numbersthat can be set/read. Maximum32.Effective when the ConstantAccess Level (A1-01) is set toUser Program (1). Constants setin constants A2-01 to A2-32 canbe set/read in programmingmode.b1-01 too3-02 - No A A A A106Hto125HCon-stantNumberName Description SettingRangeFactorySettingChangeduringOpera-tionControl Methods MEMOBUSRegis-terV/fV/fwithPGOpenLoopVec-torFluxVec-tor