Acceleration and Deceleration Characteristics6- 25Acceleration and Deceleration CharacteristicsThis section explains the acceleration and deceleration characteristics of the Inverter. Setting Acceleration and Deceleration TimesAcceleration time indicates the time taken for the output frequency to climb from 0% to 100%. Decelerationtime indicates the time taken for the output frequency to reduce to 0%. The factory setting of the accelerationtime is C1-01, and the factory setting of the deceleration time is C1-02.Related ParametersCon-stantNumberName Description SettingRangeFactorySettingChangeduringOpera-tionControl Methods MEMOBUSRegis-terV/fV/fwithPGOpenLoopVec-torFluxVec-torC1-01 Accelera-tion time 1Sets the acceleration time to acceleratefrom 0 to the maximum output frequency,in 1-second units.0.0 to6000.0*110.0 sYes Q Q Q Q 200HC1-02 Decelera-tion time 1Sets the deceleration time to deceleratefrom the maximum output frequency to 0,in 1-second units.Yes Q Q Q Q 201HC1-03 Accelera-tion time 2The acceleration time when the multi-function input “accel/decel time 1” is setto ON.Yes A A A A 202HC1-04 Decelera-tion time 2The deceleration time when the multi-function input “accel/decel time 1” is setto ON.Yes A A A A 203HC1-05 Accelera-tion time 3The acceleration time when the multi-function input “accel/decel time 2” is setto ON.No A A A A 204HC1-06 Decelera-tion time 3The deceleration time when the multi-function input “accel/decel time 2” is setto ON.No A A A A 205HC1-07 Accelera-tion time 4The acceleration time when the multi-function input “accel/decel time 1” and“accel/decel time 2” are set to ON.No A A A A 206HC1-08 Decelera-tion time 4The deceleration time when the multi-function input “accel/decel time 1” and“accel/decel time 2” are set to ON.No A A A A 207HC1-10Accel/decel timesetting unit0: 0.01-second units1: 0.1-second units 0 or 1 1 No A A A A 209HC1-11Accel/decel timeswitchingfrequencySets the frequency for automatic accelera-tion/deceleration switching.Below set frequency: Accel/decel time 4Above set frequency: Accel/decel time 1The multi-function input “accel/deceltime 1” or “accel/decel time 2” take prior-ity.0.0 to400.0*20.0 Hz No A A A A 20AH0.0 to300.0*3