Monitor Constants6- 93 Using Pulse Train Monitor ContentsThis section explains pulse monitor constants.Related ConstantsSelecting Pulse Monitor ItemsOutput digital operator monitor items (U1- [status monitor]) from pulse monitor terminal MP-AC. Referto Chapter 5 User Constants, and set the part of U1- (Status monitor). The possible monitor selec-tions are limited as follows: U1-01, 02, 05, 20, 24, 36.Adjusting the Pulse Monitor ItemsAdjust the pulse frequency output from pulse monitor terminal MP-SC. Set the pulse frequency output when100% frequency is output to H6-07.Set H6-06 to 2, and H6-07 to 0, to output the frequency synchronous with the Inverter's U-phase output.Application PrecautionsWhen using a pulse monitor constant, connect a peripheral device according to the following load conditions.If the load conditions are different, there is a risk of characteristic insufficiency or damage to the machinery.Con-stantNumberName Description SettingRangeFactorySettingChangeduringOpera-tionControl Methods MEMOBUSRegis-terV/fV/fwithPGOpenLoopVec-torFluxVec-torH6-06Pulse trainmonitorselectionSelect the pulse train monitoroutput items (value of the part of U1-).There are two types of monitoritems: Speed-related items andPID-related items.1, 2, 5,20, 24,362 Yes A A A A 431HH6-07Pulse trainmonitor scal-ingSet the number of pulses outputwhen speed is 100% in hertz.Set H6-06 to 2, and H6-07 to 0,to make the pulse train monitoroutput synchronously to the out-put frequency.0 to32000 1440 Hz Yes A A A A 432HUsing a Sourcing OutputOutput Voltage(Isolated)VRL (V)Load Impedance (kΩ)+5 V min. 1.5 kΩ min.+8 V min. 3.5 kΩ min.+10 V min. 10 kΩ min.Load impedanceMPACVRL
