6 -150 Copying ConstantsThe Digital Operator can perform the following three functions using the built-in EEPROM (non-volatilememory).• Store Inverter constant set values in the Digital Operator (READ)• Write constant set values stored in the Digital Operator to the Inverter (COPY)• Compare constant set values stored in the Digital Operator with Inverter constants (VERIFY)Related ConstantsCOPY Function Selection (SPEC: E or Later Only)The available COPY functions (o3-01 “Copy function selection”) differ depending on the SPEC of Inverter asshown in the table below.* The initial values of user constants that have been stored using the constant o2-03 cannot be copied.Con-stantNumberName Description SettingRangeFactorySettingChangeduringOpera-tionControl Methods MEMOBUSRegis-terV/fV/fwithPGOpenLoopVec-torFluxVec-toro3-01 Copy func-tion selection0: Normal operation1: READ (Inverter to Operator)2: COPY (Operator to Inverter)3: Verify (compare)0 to 3 0 No A A A A 515Ho3-02 Read permit-ted selection0: Read prohibited1: Read permitted 0 or 1 0 No A A A A 516HREAD SourceInverter withSPEC: C orearlier(PRG:101)Inverter withSPEC: C orearlier(PRG:101)Inverter withSPEC: E orearlier(PRG:103)Inverter withSPEC: E orearlier(PRG:103)COPY DestinationInverter withSPEC: C orearlier(PRG:101)Inverter withSPEC: E orearlier(PRG:103)Inverter withSPEC: C orearlier(PRG:101)Inverter withSPEC: E orearlier(PRG:103)READ (Inverter → Operator) Available Available Available AvailableREAD (Inverter → Operator) Available Available* N/A AvailableVERIFY Available N/A N/A Available
