Confirmations upon Delivery1- 5Inverter Model NumbersThe model number of the Inverter on the nameplate indicates the specification, voltage class, and maximummotor capacity of the Inverter in alphanumeric codes.Fig 1.2 Inverter Model NumbersInverter SpecificationsThe Inverter specifications (“SPEC”) on the nameplate indicate the voltage class, maximum motor capacity,the protective structure, and the revision of the Inverter in alphanumeric codes.Fig 1.3 Inverter SpecificationsTERMSOpen Chassis Type (IEC IP00)Protected so that parts of the human body cannot reach electrically charged parts from the front when theInverter is mounted in a control panel.Enclosed Wall-mounted Type (IEC IP20, NEMA 1 (Type 1))The Inverter is structured so that the Inverter is shielded from the exterior, and can thus be mounted to theinterior wall of a standard building (not necessarily enclosed in a control panel). The protective structure con-forms to the standards of NEMA 1 (Type 1) in the USA. The protective covers (see Fig. 1.4) are required foran IEC IP20 or NEMA 1 (Type 1) protective structure.CIMR - F7 A 2 0P4InverterVarispeed F7No.A Standard domestic modelSpecificationNo.24AC input, 3-phase, 200 VAC input, 3-phase, 400 VVoltage ClassNo.0P40P73000.4 kW0.75 kW300 kWMax. Motor Capacityto to"P" indicates the decimal point.2 0P4 1 ENo.01Open chassis (IEC IP00)Design revision orderEnclosed wall-mounted (IEC IP20,NEMA 1 (Type 1))Protective StructureNo.24AC input, 3-phase, 200 VAC input, 3-phase, 400 VVoltage ClassNo.0P40P73000.4 kW0.75 kW300 kWMax. Motor Capacityto to"P" indicates the decimal point.
