Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

21 2-TONE90 Function Reference Version: 1.1121.2.1 Duration of 1st ToneThis function allows you to configure the 1st Tone Encodeconfigured in the 2-tone Encode Memory List.You can configure the Duration of 1st Tone using KPG-89D. Normally, configure this duration to 1 second.! Configuration using KPG-89D• Configuring the Duration of 1st Tone (Refer toFPRG 6.11.1 Encode tab - Duration of 1st Tone.)21.2.2 Duration of 2nd ToneThis function allows you to configure the 2nd ToneEncode transmit configured in the 2-tone Encode MemoryList.You can configure the Duration of 2nd Tone using KPG-89D. Normally, configure this duration to 3 seconds.! Configuration using KPG-89D• Configuring the Duration of 2nd Tone (Refer toFPRG 6.11.1 Encode tab - Duration of 2nd Tone.)21.2.3 Duration of Single ToneThis function allows you to configure the Single ToneEncode transmit time configured in the 2-tone EncodeMemory List.You can configure the Duration of Single Tone usingKPG-89D. Normally, configure this duration to 5 seconds.! Configuration using KPG-89D• Configuring the Duration of Single Tone (Refer toFPRG 6.11.1 Encode tab - Duration of SingleTone.)21.2.4 Gap TimeThis function allows you to configure the unmodulatedcarrier time between the 1st Tone and the 2nd Toneconfigured in the 2-tone Encode Memory List istransmitted.You can configure the Gap Time using KPG-89D.Normally, configure this period to 0 ms.! Configuration using KPG-89D• Configuring the Gap Time (Refer to FPRG 6.10.1Encode tab - Gap Time.)21.2.5 First Tone Delay TimeThe First Digit Delay Time is the delay time between thetime that the transceiver begins transmission and the timethat it ends the 2-tone transmission. The unmodulatedtransmission is performed during the First Digit DelayTime.You can configure the First Tone Delay Time using KPG-89D.! Configuration using KPG-89D• Configuring the First Tone Delay Time (Refer toFPRG 6.10.1 Encode tab - First Tone Delay Time.)21.2.6 SidetoneThis function allows the transceiver to monitor the 2-tonetransmission from the local speaker.You can configure the 2-tone sidetone using KPG-89D.! Configuration using KPG-89D• Configuring the Sidetone (Refer to FPRG 6.11.1Encode tab - Sidetone.)21.2.7 2-tone Encode Memory ListThis is the code list for performing the 2-tone Encodeoperation. The transceiver transmits the 2-tone when thecode configured in this list is selected.You can configure the following functions in the 2-toneEncode Memory List.Table 21-1 Autodial List ConfigurationAutodial List OperationSingle ToneThis function allows you to configure thetransmission code as a Single Tone. Youcannot configure the 2nd Tone whenconfiguring the transmission code as aSingle Tone.2-tone NameThis function allows you to assign a name toeach List number. You can configure amaximum of 12 characters to each number.1st ToneThis function allows you to configure the 1stTone frequency. You can configure thefrequency between 288.5 and 3106.0 Hz.2nd ToneThis function allows you to configure the 2ndTone frequency. You can configure thefrequency between 288.5 and 3106.0 Hz.You cannot configure the 2nd Tone whenconfiguring the transmission code as aSingle Tone.