156 Function Reference Version: 1.1130 CLOCKThe transceiver is equipped with an internal clock IC.With the IC, the current time can be displayed on theLCD.The Clock Function has the following four functions.• Displaying the current time• Displaying the time when the transceiver is turned ON• Time Stamp function for FleetSync Messages• Time adjustment30.1 Current Time DisplayThis function allows the transceiver to display the currenttime on the main display.! Transceiver Operation1. Press the PF Clock key.The current time appears on the main display.#24-hour format#12-hour format2. Press any key.The display returns to the previous display.Note: The transceiver is equipped with a separate battery for theclock IC. When this battery runs out, the clock will not bedisplayed properly. In this case, you must recharge thebattery and configure the time again.In this case, "- : --" appears.! Configuration using KPG-89D• Assigning functions to the PF keys (Refer to 6.8Key Assignment.)30.2 Displaying the Time whenthe Transceiver is TurnedON.This function allows the transceiver to display the currenttime when the transceiver is turned ON. The transceiverdisplays the time when it is turned ON for 2 seconds, thenit displays the channel number. When "Clock" is selectedin the Power-on Message type, the time appears whenthe transceiver is turned ON.You can enable/disable the Power-on Clock functionusing KPG-89D.Note:" You cannot use this function with the Power-on text function." The Power-on Clock does not appear when the TransceiverPassword is configured.! Configuration using KPG-89D• Configuring the Power-on Clock (Refer to 6.7.2Common-Page 2 tab - Message Type.)30.3 Configuring the TimeThis function allows you to configure the time.You can configure the time when the Optional Features -)Common Page 2 -) Clock Adjustment checkbox ischecked.You can enable/disable the time configuration using KPG-89D.! Transceiver operation1. Press and hold [C], then press the Power switch atthe same time.The transceiver enters Year Entry Mode.2. Select the year and press [S].TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180