Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 8320 DTMF20.2.3 First Digit TimeThis function allows you to adjust the extension time forthe transceiver to transmit the first digit of the DTMFstring.The period for the transceiver to transmit the first digit ofthe DTMF string can be obtained by adding thetransmission time configured in the DTMF Speed to theFirst Digit Time.This function ensures the recognition of the 1st DTMFdigit even if the receiving party’s transceiver is using thePower Saver function or performing scan.You can configure the First Digit Time using KPG-89D.! Configuration using KPG-89D• Configuring the First Digit Time (Refer to FPRG6.10.1 Encode tab - First Digit Time.)20.2.4 * and # Digit TimeThe * and # Digit Time is the extension time for thetransceiver to transmit the * Tone and # Tone of the DTMFstring.The period for the transceiver to transmit the * tone and #tone of the DTMF is obtained by adding the transmissiontime configuring the DTMF Speed to the * tone and # DigitTime.When the first digit of the DTMF string is the * tone or the# Digit Time, the transceiver compares the extension timeto transmit the first digit configured in the First Digit Timewith the * and # Digit Time and uses the longer extensiontime to transmit.You can configure the * and # Digit Time using KPG-89D.! Configuration using KPG-89D• Configuring the * and # Digit Time (Refer to FPRG6.10.1 Encode tab - * and # Digit Time.)20.2.5 DTMF Hold TimeThis function allows you to configure the unmodulatedtime before transmitting the DTMF tone using KeypadAuto PTT, from when the keypad is disabled to when thetransceiver returns to receiving mode.The receiving party’s transceiver may translate the DTMFsignal as one continuous string. The transceiver holdstransmission when sending a continuous DTMF signal.You can configure the DTMF Hold Time using KPG-89D.! Configuration using KPG-89D• Configuring the DTMF Hold Time (Refer to FPRG6.10.1 Encode tab - DTMF Hold Time.)20.2.6 D Code AssignmentThis function allows a user to select the D code to usedas the D Code if the DTMF or Pause.You can configure the D Code Assignment using KPG-89D.! Configuration using KPG-89D• Configuring the D Code Assignment (Refer toFPRG 6.10.1 Encode tab - D Code Assignment.)20.2.7 SidetoneThis function allows the transceiver to emit the DTMFtransmission tone from the local speaker when sendingthe DTMF string.You can enable/disable the DTMF Sidetone using KPG-89D.Note: This function cannot be activated in Emergency Mode.• The DTMF tone does not sound when EmergencyInformation/ Emergency Mode Type is “Silent” andEmergency Type is “DTMF”.! Configuration using KPG-89D• Configuring the DTMF Sidetone (Refer to FPRG6.10.1 Encode tab - Sidetone.)20.2.8 Manual DialingThis function allows a user to transmit the DTMF tones,while transmitting by pressing the PTT switch, whenpressing [0] - [9], [*], and [#] on the Mic Keypad.You can enable/disable the Manual Dialing function usingKPG-89D.! Configuration using KPG-89D• Configuring the Manual Dialing (Refer to FPRG6.10.1.Encode tab - Manual Dialing.