Version: 1.11 Function Reference 12923 SCAN! Transceiver Operation# Activating Scan1. Press the PF Scan key.The transceiver starts scanning.The “Scan n” and “ ” icon appear on theLCD . The Zone number in the Scan List isentered for “n”.# Deactivating Scan1. Press the PF Scan key during scan.The “ ” icon disappears and the scan ends.! Configuration using KPG-89D• Configuring the Scan Type (Refer to FPRG 6.9.10Scan Type.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)23.5 Priority ScanThis function allows the transceiver to scan the highpriority CH/GID regardless of the configuration in eachCH/GID.The transceiver monitors the Priority Channel even if thetransceiver is receiving on the normal channel usingSingle Scan/ Multi Scan/ List Scan when this function isenabled.The transceiver scans the Priority Channel in thefollowing conditions.• When there is no Priority Channel in the selectedZone in the Single Scan.• When the Priority Channel is present in other than theselected Zone in the Multi Scan.• When the Priority Channel does not exist in the Zoneconfigured in the Scan List Table.The transceiver makes Single Scan/ Multi Scan/ ListScan to scan the Priority Channel at the interval timeconfigured in the Scan Information window > LookbackTime A or Lookback Time B.You can configure the Priority Channel using KPG-89D.Table 23-3 Priority Scan FunctionNote:" This function allows the transceiver to monitor the presence of asignal on the Priority Channel while receiving a call on a normalChannel during Priority Scan." You cannot configure the Group ID in Trunking system asPriority Channel 1 - 2." The transceiver does not look back at the Priority Channel whilepausing scan in Trunking system.! Transceiver Operation# Priority Channel 1The following “ ” icon appears.TK-2180/ 3180TK-7180/ 8180Priority Scan OperationFixed The Channel configured using KPG-89D isconfigured as the Priority Channel.SelectedThe transceiver scans the Selected Channel asthe Priority Channel.You cannot configure the Priority Channel usingKPG-89D.OperatorSelectableThe channel selected by the operator isconfigured as the Priority Channel. A user canchange the Priority Channel by pressing andholding the PF Scan key for 2 seconds in thePriority Scan Configuration Mode.TK-2180/ 3180TK-7180/ 8180