Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

24 EMERGENCY MODE140 Function Reference Version: 1.11! Configuration using KPG-89D• Configuring the Man Down Delay Time (Refer toFPRG 6.14.16 Man Down Delay Time.)24.1.18 Man Down Pre-alert(TK-2180/ 3180 only)The Man Down Pre-alert is the alert tone beeping fromthe time when Man Down Switch is switched On to thetime when the Man Down Switch function is enabled.When the Man Down Switch is enabled unintentionally,the transceiver emits the Pre-alert before activating theEmergency function to notify the user that the switch isswitched On.You can configure the Man Down Delay Time using KPG-89D. The Man Down Pre-alert duration must be shorterthan the Man Down Delay Time.! Configuration using KPG-89D• Configuring the Man Down Pre-alert (Refer toFPRG 6.14.17 Man Down Pre-alert.)24.1.19 Man Down Logic Type(TK-2180/ 3180 only)You can configure the logic of the Man Down Switch(External Switch).You can configure the Man Down Logic Type using KPG-89D.Table 24-7 Man Down Logic Type Operation! Configuration using KPG-89D• Configuring the Man Down Logic (Refer to FPRG6.14.18 Man Down Logic Type.)24.1.20 Emergency IDThis function allows you to configure the code to be sentor the control type each time the transceiver starts theautomatic transmission/ reception in the EmergencyMode.You can configure the Emergency ID using KPG-89D.The following Emergency IDs are available.Table 24-8 Emergency ID OperationNote: You can configure the ANI board only if the “ANI Board” isselected in the Extended Function.! Configuration using KPG-89D• Configuring the Emergency ID (Refer to FPRG6.14.19 Emergency ID.)24.1.21 Emergency DTMF IDThis function allows you to configure the DTMF code tobe sent first in the Emergency Mode when “DTMF” isselected in the Emergency ID.You can configure the Emergency DTMF ID using KPG-89D.! Configuration using KPG-89D• Configuring the Emergency DTMF ID (Refer toFPRG 6.14.20 Emergency DTMF ID.)Man Down Logic Type OperationActive LowThe transceiver detects that the ManDown Switch is enabled when theInput port becomes low.Active HighThe transceiver detects that the ManDown Switch is enabled when theInput port becomes high.Emergency ID OperationNoneThe transceiver transmits/receivesaccording to the configuration in KPG-89D.DTMFThe transceiver transmits/receivesaccording to the configuration in KPG-89D. The transceiver sends the DTMFcode configured first at the EmergencyDTMF ID.FleetSyncThe transceiver transmits/receivesaccording to the configuration in KPG-89D. The transceiver sends theEmergency Call Fleet first and theFleetSync SelCall ID configured in theEmergency Call ID.ANI Board The transceiver transmits/receives inconjunction with the ANI board control.