23 SCAN134 Function Reference Version: 1.1123.7.11 AC ControlThis function allows a user to activate the Carrier Squelchafter deactivating the QT/DQT on the Priority Channelduring Priority Scan. The user can quickly jump to thePriority Channel since the transceiver does not need tocheck the QT/DQT.The user can hear conversations on the Priority Channeleven if another QT/DQT group is using the same PriorityChannel.! Configuration using KPG-89D• Configuring the AC Control (Refer to FPRG 6.9.11AC Control.)23.7.12 Priority 1 Temporary Delete/AddThis function allows a user to temporarily delete thePriority Channel 1 by pressing the PF Scan Del/Add keywhen scan pauses on Priority Channel 1 in Scan Mode.! Configuration using KPG-89D• Configuring the Priority 1 Temporary Deletefunction (Refer to FPRG 6.9.12 Priority 1Temporary Delete/Add.)23.7.13 Priority 2 Temporary Delete/AddThis function allows a user to temporarily delete thePriority Channel 2 by pressing the PF Scan Del/Add keywhen scan pauses on Priority Channel 2 in Scan Mode.! Configuration using KPG-89D• Configuring the Priority 2 Temporary Deletefunction (Refer to FPRG 6.9.13 Priority 2Temporary Delete/Add.)23.7.14 Off-hook Scan(TK-7180/ 8180 only)This function allows you to configure the scan operationin conjunction with the Mic hook status. You canconfigure the scan operation as below.Table 23-7 Off-hook Scan Operation! Configuration using KPG-89D• Configuring the Off-hook Scan (Refer to FPRG6.9.14 Off-hook Scan.)23.7.15 Revert CH/GID DisplayThis function allows the transceiver to display the RevertZone-CH/GID on the display during scan.! Configuration using KPG-89D• Configuring the Revert CH/GID Display (Refer toFPRG 6.9.15 Revert CH/GID Display.)23.7.16 CH/GID RecallThis function allows the transceiver to move to the LastCalled Zone-CH/GID when the PF CH/GID Recall key ispressed during scan. A user can move to the lastreceived Zone-CH/GID when receiving a call during scanwhile he/she is away from the transceiver.Note:" When the PF CH/GID Recall key is pressed while no signal isreceived after scan starts, the transceiver moves to the ScanStart CH/GID." When the CH/GID Recall function is enabled, the transceiverdoes not resume scan even if the Dropout Delay Time or theDwell Time expires." The CH/GID Recall function is disabled when changing the CH/GID. The transceiver resumes scan after the Key Dwell Timeexpires." The Looolback function will not be activated while performingthe CH/GID Recall function.! Transceiver Operation# The transceiver moves to the Last Called Zone-CH/GID.• Press the PF CH/GID Recall key during scan.Off-hookScan OperationCheck(Enable)The transceiver activates scan when the PFScan key is pressed regardless of the status ofthe microphone.Uncheck(Disable)The transceiver activates scan when the PFScan key is pressed if the microphone is in On-hook status. Scan does not start when themicrophone is Off-hook.Scan pauses on the Revert CH/GID pauseswhen switching the Scan Mode from On-hook toOff-hook. The repeater resumes scan when themicrophone returns to the On-hook position.