Version: 1.11 Function Reference 7920 DTMF5. Press the PTT switch to make a Voice call andsend the DTMF code.Press [Side 2]/ [!] to only send the DTMFcode.The transceiver transmits the DTMF tone.! Configuration using KPG-89D• Configuring the Store & Send function (Refer toFPRG 6.10.1 Encode tab - Store & Send.)• Configuring the List Selection Key (Selector)(Refer to FPRG 6.8.2 General Tab - List SelectionKey (Selector).)20.1.3 Keypad Auto PTTThis function allows you to transmit the DTMF Toneswhen pressing [0] - [9], [*] and [#] on the Keypad.You can enable/disable the Keypad Auto PTT functionusing KPG-89D.Table 20-2 DTMF Tone Key OperationNote:" Press and hold [*] for 1 second, then press [2] to enter theDTMF “A” tone." Press and hold [*] for 1 second, then press [5] to enter theDTMF “B” tone." Press and hold [*] for 1 second, then press [8] to enter theDTMF “C” tone." Press and hold [*] for 1 second, then press [0] to enter theDTMF “D” tone." Press [*] then press [*] again to enter the DTMF “*” tone." Press [*] then press [#] to enter the DTMF “#” tone.! Transceiver Operation1. Press the key to transmit the DTMF tone.The transceiver transmits the DTMF toneaccording to the selected key.2. Repeat step 1 if necessary.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180Frequency DTMF Digit941.000 + 1336.000 Hz DTMF tone “0”697.000 + 1209.000 Hz DTMF tone “1”697.000 + 1336.000 Hz DTMF tone “2”697.000 + 1447.000 Hz DTMF tone “3”770.000 + 1209.000 Hz DTMF tone “4”770.000 + 1336.000 Hz DTMF tone “5”770.000 + 1447.000 Hz DTMF tone “6”852.000 + 1209.000 Hz DTMF tone “7”852.000 + 1336.000 Hz DTMF tone “8”852.000 + 1447.000 Hz DTMF tone “9”697.000 + 1633.000 Hz DTMF tone “A”770.000 + 1633.000 Hz DTMF tone “B”852.000 + 1633.000 Hz DTMF tone “C”941.000 + 1633.000 Hz DTMF tone “D”941.000 + 1209.000 Hz DTMF tone “*”941.000 + 1447.000 Hz DTMF tone “#”