Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 4110 KEY ASSIGNMENTYou can assign functions to the Selector and the PFkeys.! Configuration using KPG-89D• Assigning functions to the Selector and PF keys(Refer to FPRG 6.8 Key Assignment.)10.1 Available Functions(TK-2180/ 3180 only)You can assign functions to the Selector keys usingKPG-89D.You can configure these functions to the TK-2180/ 3180only.Table 10-1 Assigning Functions to the Selector10.2 Assigning Functions to thePF KeysYou can assign functions to the PF keys using KPG-89D.Table 10-2 Available FunctionsFunction Name DescriptionNoneThe repeater does not perform anyoperation. The Key-entry Error Tonesounds when the None key is pressed.CH/GID Up/Down Turn the Selector to increase/decreasethe CH/GID in steps of 1.Zone Up/Down Turn the Selector to increase/decreasethe Zone number in steps of 1.Function Name DescriptionNoneThe repeater does not perform anyoperation. The Key-entry Error Tonesounds when the None key is pressed.2-toneThe transceiver sends the 2-tone codeconfigured in the 2-tone Encode List Call 2when the key is pressed. (Refer to 21 2-tone.)AutodialThe transceiver sends the DTMF codeconfigured in the DTMF Autodial List whenthe key is pressed. (Refer to 20 DTMF.)AutodialProgrammingPress the PF Autodial Programming keyto configure, change, or delete the DTMFAutodial List. (Refer to 20.4.2 AutodialProgramming.)Auto ReplyMessagePress the PF Auto Reply Message key toswitch the Auto Reply Message On/Offwhen the VGS-1 is installed to thetransceiver. (Refer to 31.3 Auto ReplyMessage.)Auto TelephonePress the PF Auto Telephone key tosearch the RIC repeater and automaticallyconnect to the telephone. (Refer to17.1.14 Auto Telephone Search.)AUXThe AUX Output terminal becomes active/inactive when the PF AUX key is pressed.A user can control the external deviceconnected to the AUX port since the portoutput varies in conjunction with the AUXkey.This function is available only for the TK-2180/ 3180.AUX AThe AUX A Output terminal becomesactive/inactive when the PF AUX A key ispressed. A user can control the externaldevice connected to the AUX A port sincethe port output varies in conjunction withthe AUX A key.This function is available only for the TK-7180/ 8180.AUX BThe AUX B Output terminal becomesactive/inactive when the PF AUX B key ispressed. The user can control the externaldevice connected to the AUX B port sincethe port output varies in conjunction withthe AUX B key.This function is only available for the TK-7180/ 8180.Call 1/2/3/4/5/6You can send FleetSync Status, DTMFcode, and 2-tone code by pressing one ofPF Call 1 - Call 6 keys. (Refer to 1.11 CallKey.)CH/GID DownPress the PF CH/GID Down key todecrease the CH/GID in steps of 1. Pressand hold this key for more than 1 secondto decrease the CH/GID number in stepsof 1 every 200 ms (Refer to 2.5 Changingthe CH/GID.)CH/GID UpPress the PF CH/GID UP key to increasethe CH/GID in steps of 1. Press and holdthis key for more than one second toincrease the CH/GID number in steps of 1every 200 ms. (Refer to 2.5 Changing theCH/GID.)Channel EntryYou can directly specify the channelnumber using the Keypad of the TK-2180/3180 or the microphone of the TK-7180/8180. (Refer to 2.6 Channel Entry.)CH/GID RecallPress the PF CH/GID Recall key to moveto the Last Called Zone-CH/GID duringscan. (Refer to 23.7.16 CH/GID Recall.)Clock Press the PF Clock key to display theclock. (Refer to 30 CLOCK.)Direct CH/GID1 - 5Press the PF Direct CH/GID 1 - 5 key tomove to the registered CH/GID. (Refer to2.8 Direct CH/GID.)Function Name Description