Version: 1.11 Function Reference 10922 FLEETSYNC3. The “ ” icon blinks.The received Short Message appears on thedisplay.A user can scroll the message from right to leftwhen the Short Message is longer than 12characters.4. The display returns to the last display.The “ ” icon becomes solid after reading theShort Message. (Refer to 22.7 Stack.)Note: To use serial communications, a user must prepare theFleetSync compatible software or external devices.22.4.3 Short Message StackThis function is used to store the received Short Messagein the Stack memory. The transceiver can store amaximum of 15 Short Messages.When the message is stacked, the “ ” icon blinks. Inthis case, a user can read the stored Status Message byentering Stack Mode. (Refer to 22.7 Stack.)You can configure the Caller ID to be stacked using KPG-89D.Note: The transceiver can stack a maximum of 15 Messages(Status Message and Short Message).! Configuration using KPG-89D• Configuring the Short Message Stack (Refer toFPRG 6.12.2 General 2 tab - Short MessageStack.)22.4.4 Short Message on Data Zone-CH/GIDThis function allows the transceiver to automaticallychange the Data Zone-CH/GID to send the ShortMessage.The transceiver automatically changes the channel toData Zone-CH/GID to send the Short Message. Thetransceiver returns to the previous Zone-CH/GID whentransmission ends. This function allows the transceiver tosend data using the selected Zone-Channel/Group ID.You can enable/disable this function using KPG-89D.! Configuration using KPG-89D• Configuring the Short Message on Data Zone-CH/GID function (Refer to FPRG 6.12.3 Parametertab - Short Message on Data Zone-CH/GID.)22.4.5 Short Message Serial OutputThis function allows the transceiver to send the caller’sFleet/ID from the transceiver’s communication port whenthe transceiver receives a Short Message.The dispatcher can remote control the transceivers with aPC. It can also retrieve the transceiver’s statusinformation by connecting external devices.You can enable/disable this function using KPG-89D.! Configuration using KPG-89D• Configuring the Short Message Serial Output(Refer to FPRG 6.12.2 General 2 tab - ShortMessage Serial Output.)TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180
