Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

94 Function Reference Version: 1.1122 FLEETSYNCFleetSync, developed by Kenwood, utilizes MSK(Minimum Shift Keying) modulation to exchange databetween transceivers. It identifies individual transceivers,and allows for text messages and GPS datacommunications.You can also connect the transceiver to a PC or externaldevices since FleetSync supports serial datacommunication.22.1 PTT ID FunctionPTT ID is the function to transmit an identification codewhen making a call.A user can view the caller’s ID with the received PTT ID.The user can confirm the caller not only by voice, but alsothrough the display.You can configure the PTT ID for each CH/GID. The PTTID is transmitted in the following timing. (Refer to 14 PTTID.)Table 22-1 Timing To Transmit the PTT IDNote:" You can only select the ID configured in FleetSync > ID List forList 1 - 100." The PTT ID is transmitted to make a voice communication. ThePTT ID is not transmitted when transmitting with the PF DataPTT port and the PF Ext. PTT (Data) port.! Configuration using KPG-89D• Configuring the PTT ID (Channel) (Refer to FPRG6.3.12 PTT ID.)• Configuring the PTT ID (Group ID) (Refer toFPRG 6.6.8 PTT ID.)22.1.1 Caller ID DisplayThis function allows you to display the received PTT ID onthe LCD.A user can confirm the caller not only by voice, but alsothrough the display.“CID” appears on the sub display when the transceiverreceives a PTT ID. The display returns to the channeldisplay after the Auto Reset Timer expires if the AutoReset Timer is configured. The display returns to normalwhen pressing a key.The ID is displayed when a PTT ID is received even whenthe conditions for disabling the Mute function are notsatisfied.You can configure the receive PTT ID to be displayedusing KPG-89D.Note:" You cannot reply to the ID displayed on the display." The PTT ID is displayed when receiving BOT or EOT.! Configuration using KPG-89D• Configuring the Caller ID Display (Refer to FPRG6.12.1 General 1 tab - Sub Display.)22.1.2 PTT ID SidetoneThis tone sounds when the caller transmits the FleetSyncID. This tone notifies the user of when the conversion ispossible after the PTT switch or the PF Ext. PTT (Voice)port is pressed.This function prevents the transceiver from missing callsby starting the conversion during FleetSync PTT IDtransmission.You can enable/disable this function using KPG-89D.Note: When the PTT ID is configured to the channel, the ProceedTone is disabled.! Configuration using KPG-89D• Configuring the PTT ID Sidetone (Refer to FPRG6.12.1 General 1 tab - PTT ID Sidetone.)PTT ID Timing To Transmit the PTT IDOff The PTT ID is not transmitted.BOTYou can transmit Fleet (Own) and ID (Own)as the PTT ID when pressing the PTTswitch or the PF Ext. PTT (Voice) port.EOTYou can transmit Fleet (Own) and ID (Own)as the PTT ID when releasing the PTTswitch or the PF Ext. PTT (Voice) port.BothYou can transmit Fleet (Own) and ID (Own)as the PTT ID when pressing/releasing thePTT switch or the PF Ext. PTT (Voice) port.List 1 - 100You can call the receiving party’s PTT ID.You can select the ID from 1 to 100 inSelCall list. You can make a SelCall withthe Fleet and the ID.