22 FLEETSYNC120 Function Reference Version: 1.1122.9.5 Auto Reset TimerThis function allows a user to reset the LED, Alert Tone,Monitor, and the LCD to the previous display after acertain period elapses.You can configure the following functions for the AutoReset Timer.Table 22-22 Auto Reset Timer Operation! Configuration using KPG-89D• Configuring Auto Reset Timer (Refer to FPRG6.12.2 General 2 tab - Auto Reset Timer.)22.9.6 FleetSync IIThe FleetSync II is a new FleetSync format utilizing FEC(Forward Error Correction) technology. This formatcorrects errors in order to perform more reliable datacommunications than in conventional datacommunications.In the FleetSync II, extended bits are added to correcterrors. Therefore, the data length is 4 times as long asthe original format.You can configure the data communication to use theFleetSync II format using KPG-89D.Note: The FleetSync II format is not compatible with the originalFleetSync format.! Configuration using KPG-89D• Configuring the FleetSync II (Refer to FPRG6.12.1 General 1 tab - FleetSync II.)22.9.7 Manual DialingThis function allows a user to directly enter the Fleet andthe ID number.When this function is enabled, you can directly enter theFleet/ID using the Keypad, Selector, or the [Up]/[Down]keys.You can enable/disable this function using KPG-89D.! Configuration using KPG-89D• Configuring the Manual Dialing (Refer to FPRG6.12.1 General 1 tab - Manual Dialing.)22.9.8 Group IDA user can make a Group Call using FleetSync. Thisfunction allows the user to assign the same Divisional IDto the transceivers in the same Group. The user canmake a call in the smaller unit than Fleet Call andSupervisor Call. The user can normally make this call inthe same Fleet.Table 22-23 Group ID ResponseCheck the “Group Call” checkbox when configuring theGroup Call and configure the Divisional ID. You canconfigure a maximum of 10 Divisions.You can configure the Group Call using KPG-89D! Configuration using KPG-89D• Configuring the Group ID (Refer to FPRG 6.12.1General 1 tab - Group ID.)• Configuring the Group ID (1 - 10) (Refer to FPRG6.12.1 General 1 tab - Group ID (1 - 10).)Auto Reset Timer OperationOff Auto Reset Timer does not work.1 - 300 sThe LED, Alert Tone, Monitor, and theLCD return to the last display when theconfigured period expires.LEDThe orange Selective Call Alert LEDstops blinking when the Auto ResetTimer expires.AlertThe intermittently emitted Alert Tonepauses when the Auto Reset Timerexpires.MonitorThe match status of the Selective Callresets when the Auto Reset Timerexpires.LCDThe display returns to the channeldisplay when the Auto Reset Timerexpires.Call TypeResponseThe ID is includedin the ID List.The ID is notincluded in the IDList.Group Call A user can respondwith a Group Call.The user canrespond with a GroupCall.However, the usermay not be able torespond according tothe Interfleetconfiguration and theUnit Encode Blockconfiguration.