Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

17 LTR TRUNKING60 Function Reference Version: 1.1117.1.17 Fix IDThe Fix ID is the LTR ID having higher priority than theGroup ID. The transceiver automatically switches to theFix ID. A user can use this ID when the user wants toreceive a call while receiving a call with other IDs.The following is the priority to move to the Fix ID.1st Fix ID > 2nd Fix ID > Displayed Group ID (Revert ID) >Selectable ID (Scan Add = Yes) > Decode IDWhen receiving a Fix ID, Call Indicator and OptionSignaling activate.The transceiver does not receive the Fix ID in thefollowing conditions.• Receiving a Fix ID call while communicating with atelephone repeater.• Receiving a call in Trunkout Mode using a repeaterother than the Home Repeater• Receiving a Fix ID call in the Data GroupYou can configure the Fix ID using KPG-89D.! Configuration using KPG-89D• Configuring the Fix ID (Refer to FPRG 6.5.18 ID(Fix ID).)17.1.18 Telephone (Block IDs)This function allows you to configure a unique ID tocommunicate with a telephone repeater. A user canmake and receive telephone calls from the transceiver.You can configure the Telephone (Block IDs) using KPG-89D.! Configuration using KPG-89D• Configuring the Telephone (Block IDs) (Refer toFPRG 6.5.22 Decode.)17.1.19 TX Inhibit (Block IDs)This function restricts the transmission ID immediatelyafter receiving the specified ID.A user can use this function when the user does not wantto transmit immediately after receiving the ID whilesharing Group ID with other parties.The user cannot transmit until the TX Inhibit Time expiresafter receiving the TX Inhibit ID when this function isenabled.You can configure the TX Inhibit (Block IDs) and the TXInhibit Time using KPG-89D. You can configure thisfunction to each transceiver.Note:" The TX Inhibit (Block IDs) function is disabled when the Zone/Group ID is changed." When the transceiver receives the TX Inhibit (Block IDs) duringscan, the transmission remains inhibited for the TX Inhibit Time.It resets the TX Inhibit Time when scan resumes, allowing thetransceiver to transmit again." When the transceiver receives the TX Inhibit (Block IDs) whilecommunicating with the repeater, the transmission remainsinhibited for the TX Inhibit Time.! Configuration using KPG-89D• Configuring the Transmit Inhibit (Block IDs) (Referto FPRG 6.5.23 Transmit Inhibit (Block IDs).)• Configuring the TX Inhibit Time (Refer to FPRG6.7.5 Trunking tab - TX Inhibit Time.)17.1.20 Decode ID (Block IDs)This function allows you to configure the receive only ID.The transceiver squelch opens when receiving a call withthe Decode ID.You can configure the Decode ID (Block IDs) using KPG-89D.! Configuration using KPG-89D• Configuring the Decode ID (Block IDs) (Refer toFPRG 6.5.24 Decode (Block IDs).)