20 DTMF82 Function Reference Version: 1.112. Press [*] and [#].The DTMF code configured to the End of Transmit.Press [S] to cancel transmitting the code.3. Press the PTT switch to make a voice call andsend the DTMF code.Press [Side 2]/ [!] to only send the DTMF code.20.2 EncodeYou can configure the following functions that are linkedto the DTMF Encode using KPG-89D.• DTMF Speed• First Digit Delay Time• First Digit Time• * and # Digit Time• DTMF Hold Time• D Code Assignment• Sidetone• Manual Dialing• Store & Send• Auto Telephone20.2.1 DTMF SpeedYou can configure the DTMF automatic transmissionspeed when automatically transmitting PTT ID, Autodial,Store & Send, BOT, or EOT.You can select the DTMF automatic transmission speed(digit/sec) or configure the Digit Time.You can configure the DTMF Speed using KPG-89D. Thefollowing speed is available to select the DTMF automatictransmission speed.Table 20-3 DTMF Automatic Transmission Speed! Configuration using KPG-89D• Configuring the DTMF Speed (Refer to FPRG6.10.1 Encode tab - DTMF Speed.)20.2.2 First Digit Delay TimeThe First Digit Delay Time is the delay time between thetime that the repeater begins the transmissions and thetime that it ends the DTMF code transmission.• Automatically transmitting the DTMF tone using PTTID, Autodial, Store & Send, BOT, EOT, and TelephoneDisconnect• Transmitting the DTMF tone using the Keypad AutoPTT functionThe transceiver performs the unmodulated transmissionduring the First Digit Delay Time.You can configure the First Digit Delay Time using KPG-89D.! Configuration using KPG-89D• Configuring the First Digit Delay Time (Refer toFPRG 6.10.1 Encode tab - First Digit Delay Time.)TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180Range Digit Time(Transmission)Gap Time(Silent)6 Digit/s 83.3 ms 83.3 ms8 Digit/s 62.5 ms 62.5 ms10 Digit/s 50.0 ms 50.0 ms15 Digit/s 33.3 ms 33.3 ms
