Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 5917 LTR TRUNKING17.1.10 Audio ControlThis function allows you to configure the conditions todisable the Mute function using the QT/DQT and OptionalSignaling. (Refer to 18.3 Signaling (Audio Control).)You can configure the Audio Control function to eachZone using KPG-89D.! Configuration using KPG-89D• Configuring the Audio Control (Refer to FPRG6.5.10 Audio Control.)17.1.11 Encode Data TypeThis function allows you to reverse the logic of the LTRMessage to be sent.You can configure the Encode Data Type using KPG-89D.! Configuration using KPG-89D• Configuring the Encode Data Type (Refer toFPRG 6.5.11 Encode Data Type.)17.1.12 Zone AddYou can configure the Zone to be added to the Scan Listusing KPG-89D.! Configuration using KPG-89D• Configuring the Zone Add function (Refer to FPRG6.5.12 Zone Add.)17.1.13 Scan ListYou can configure the Scan List according to theconfiguration of the Scan List Table using KPG-89D.! Configuration using KPG-89D• Configuring the Scan List (Refer to FPRG 6.5.13Scan List and FPRG 6.5.25 Scan List Tablewindow.)17.1.14 Auto Telephone SearchThis function allows the transceiver to search for anavailable repeater and automatically link to the repeater.The System that meets the following conditions istargeted for the search. When no System matches theseconditions, the Deny Tone sounds and the AutoTelephone Search function does not operate.• The System in which Auto TEL Search is set to “Yes”in the Zone Edit window > Auto Telephone Search.• The System with at least one repeater in whichTelephone Repeater is configured to “Yes” in theRepeater Information window > TelephoneRepeater.• The System in which Telephone ID (Block TelephoneIDs) is configured in the Zone Edit window >Telephone (Block IDs) and there is at least 1 group inthe configured range.You can configure the Zone to be added to the AutoTelephone Search List using KPG-89D.Note: The Zone, from which Auto Telephone Search starts, isalways searched, even when the Auto Telephone Search isdisabled.! Configuration using KPG-89D• Configuring the Auto Telephone Search function(Refer to FPRG 6.5.15 Auto Telephone Search.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)17.1.15 TA Busy Channel LockoutIf a user transmits on a channel while other groups areusing that channel, the user may interfere with thecommunications. This function prevents suchinterference. (Refer to 13.2.1 TA Busy Channel Lockout.)You can enable/disable the TA Busy Channel Lockoutfunction using KPG-89D.! Configuration using KPG-89D• Configuring the TA Busy Channel Lockout function(Refer to FPRG 6.5.16 TA Busy Channel Lockout.)17.1.16 TA KeyThis function allows you to enable/disable the PF TalkAround key operation. (Refer to 13.2.2 TA Key.)You can enable/disable the TA Key operation using KPG-89D.! Configuration using KPG-89D• Configuring the TA Key (Refer to FPRG 6.5.17 TAKey.)