Version: 1.11 Function Reference 13123 SCANNote:" The Scan Del/Add function does not work even if the PFScan Del/Add key is pressed." You can make the Scan Del/Add function when scan pausesif the Scan Type is configured to “List”." You cannot perform the Zone Del/Add function when theScan Type is “Single”.! Configuration using KPG-89D• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)23.7.2 Scan ListThis function allows the transceiver to perform a List Scanfor each Zone.You can configure the Scan List Table when the Scan Listis enabled.You can enable/disable the Scan List function using KPG-89D.Note: You can use this function when the Scan Type is configuredto “List Scan”.! Configuration using KPG-89D• Configuring the Scan List (Refer to FPRG 6.2.13Scan List.)23.7.3 Scan List TableThis function allows a user to select the Zone used for theScan List. Check the checkbox of the Zone that isscanned with the List Scan.! Configuration using KPG-89D• Configuring the Scan List Table (Refer to FPRG6.2.15 Scan List Table window.)23.7.4 Priority 1/ Priority 1 Zone-CHThis function allows you to configure the high priorityZone-Channels. You can configure the followingfunctions for Priority 1.Table 23-4 Priority 1 OperationNote: You cannot configure the Priority 1 Zone-CH when“Selected” is selected in the Priority 1.! Transceiver Operation# Configuring the Priority Channel1. Select the channel to be configured as thePriority Channel.2. Press and hold the PF Scan key for more than2 seconds.The transceiver enters in Priority ChannelConfiguration Mode.Priority 1 OperationNone No channel is configured as the Priority 1.Fixed You can use the Priority 1 Zone-CH configuredusing the KPG-89D as Priority 1.SelectedYou can configure the selected channel as Priority1. You cannot select the Priority Channel usingthe KPG-89D.OperatorSelectableThe channel selected by a user is configured asPriority 1. The transceiver enters PriorityConfiguration Mode when the PF Scan key ispressed and held for more than 2 seconds.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180