Version: 1.11 Function Reference 12322 FLEETSYNCTable 22-24 Auto Reset Timer OperationNote: The display returns to the last display if a key is pressedwhile the received message is displayed.! Configuration using KPG-89D• Configuring the Message Display Type (Refer toFPRG 6.12.1 General 1 tab - Message DisplayType.)22.9.20 Alert Tone (Individual Call)Alert Tone (Individual Call) sounds when receiving anIndividual Call. You can select one of 8 tones configuredin Special Alert Tone.Note: When “Infinite” is selected in the Special Alert Tone window> Cycle, the transceiver stops emitting this tone when AutoReset Timer expires.! Configuration using KPG-89D• Configuring Alert Tone (Individual) (Refer to FPRG6.12.2 General 2 tab - Alert Tone (Individual).)22.9.21 Alert Tone (Other SelectiveCalls)Alert Tone (other Selective Calls) sound when receiving aSelective Call. A user can select one of 8 tonesconfigured in Special Alert Tone.Note:" Alert Tone (other Selective Calls) is used for Group Call, FleetCall, Supervisor Call, and Broadcast Call." When “Infinite” is selected in the Special Alert Tone window >Cycle, the transceiver stops emitting this tone when Auto ResetTimer expires.! Configuration using KPG-89D• Configuring Alert Tone (Other Selective Calls)(Refer to FPRG 6.12.2 General 2 tab - Alert Tone(Other Selective Calls).)22.9.22 Alert Tone (Paging Call)Alert Tone (Paging Call) sounds when receiving a pagingcall. A user can select one of 8 tones configured inSpecial Alert Tone.Note: When “Infinite” is selected in the Special Alert Tone window> Cycle, the transceiver stops emitting this tone when AutoReset Timer expires.! Configuration using KPG-89D• Configuring Alert Tone (Paging Call) (Refer toFPRG 6.12.2 General 2 tab - Alert Tone (PagingCall).)22.9.23 Alert Tone (Status/ShortMessage Call)Alert Tone (Status/Short Message Call) sounds when theStatus/Short Message data is stacked. A user can selectone of 8 tones configured in Special Alert Tone.Note: When “Infinite” is selected in the Special Alert Tone window> Cycle, the transceiver stops emitting this tone when AutoReset Timer expires.! Configuration using KPG-89D• Configuring Alert Tone (Status/Short MessageCall) (Refer to FPRG 6.12.2 General 2 tab - AlertTone (Status/Short Message Call).)22.9.24 Alert Tone(Emergency Response)Alert Tone (Emergency Response) sounds when theEmergency Response function is configured to “Alert”. Auser can select one of 8 tones configured in Special AlertTone.Note: When “Infinite” is selected in the Special Alert Tone window> Cycle, the transceiver stops emitting this tone when AutoReset Timer expires.Message DisplayType OperationFixed“STM/SDM” appears on the displaywhen receiving a call. A user canscroll the message when themessage is longer than 13characters.Alternate“STM/SDM” and SelCall ID isdisplayed alternatively whenreceiving a call.