22 FLEETSYNC110 Function Reference Version: 1.1122.5 Long Message FunctionThis function allows the transceiver to transmit/receive amaximum of 4096 characters.With this function, a user can reliably send information tothe transceiver.Note: You must select Optional Features window > Common-Page 3 > COM port 1 - 3 > "Data".22.5.1 Sending the Long MessageYou can send the Long Message from a PC. A user is notallowed to send the Long Message from the transceiver.! Transceiver Operation1. Send the serial command to the transceiver fromthe PC.The transceiver sends the Long Message.# When the Long Message is properly sent to thereceiving party:“COMPLETE” appears on the display.# When the Long Message is not properly sent tothe receiving party:“NO REPLY” appears on the display.# When the Long Message is not sent properlysince the receiving party is busy:“BUSY” appears on the display.22.5.2 Receiving the Long MessageThe received Long Message data can be transferred to aPC. This message is sent when the transceiver isconnected to a PC or the KDS-100 (MDT). Refer to thePC Interface manual for details.Note: To use serial communications, a user must prepare theFleetSync compatible software or external devices.! Transceiver Operation1. The “RECV DATA” appears on the main displaywhen the transceiver starts receiving data.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180