Version: 1.11 Function Reference 336 EMBEDDED MESSAGE FUNCTIONThis function allows you to embed a text message(combination of alphabets and numerals) in thetransceiver.6.1 Embedded MessageThis function allows you to store a maximum of 64characters in the transceiver.You can store the transceiver’s identification information,such as its serial number and program file name.You can configure and store messages to the transceiverusing KPG-89D. The message, which is written in thetransceiver, is stored as a part of the configuration data.You can read the stored messages from the transceiverusing KPG-89D.! Configuration using KPG-89D• Configuring the Embedded Message (Refer toFPRG 6.18 Embedded Message.)• Writing the configuration data to the transceiver(Refer to FPRG 7.2 Write Data to the Transceiver).• Reading the configuration data from thetransceiver (Refer to FPRG 7.1 Read Data fromthe Transceiver).6.2 Embedded Messagewith PasswordThis function allows you to store a maximum of 64characters in the transceiver with a password.You can store the transceiver’s identification information,such as its Serial Number and Configuration file name,with the password.You can write messages and password to the transceiverusing KPG-89D. When writing a message with theEmbedded Message w/Password function, you can storethe message as a separate data from the configurationdata.You must enter the correct password to write a message.The message is not written to the transceiver unless thecorrect password is entered.You can read the stored messages from the transceiverusing KPG-89D.! Configuration using KPG-89D• Configuring the Embedded Message (Refer toFPRG 6.19 Embedded Message with Password.)• Writing the configuration data to the Transceiver(Refer to FPRG 7.2 Write Data to the Transceiver.)• Reading the configuration data from theTransceiver (Refer to FPRG 7.1 Read Data fromthe Transceiver.)
