1 BASIC FUNCTION6 Function Reference Version: 1.113. Press [S].The Squelch Level changes and the LCD returnsto normal display. “ ” icon is also turned Off.Note:" The Squelch Level operates only in Conventional Groups." Signalling is disabled while configuring the Squelch Level" Following are the operations of the keys while changing theSquelch Level.Table 1-9 Key Operation! Configuration using KPG-89D• Configuring the Squelch Level to the transceiver(Refer to 6.7.4 Conventional tab - Squelch Level.)• Assigning functions to the PF keys (Refer to 6.8Key Assignment.)Figure 1-4 Squelch Level1.7 CompanderThe Compander is used to improve the S/N ratio of a thetransmitted audio signal by compressing it at thetransmitting party and expanding it at the receiving party.You can enable/disable this function using the KPG-89D.The transmitting party and the receiving party must havethe same configuration to use this function.! Configuration using KPG-89D• Configuring the Compander function to eachchannel (Refer to 6.3.15 Compander.)• Configuring the Compander function to each GID(Refer to 6.6.14 Compander.)Key Name OperationSelector/ [ ]/ [ ]Increase/decrease the digit number,Squelch Level confirmation* The List Selection key (Selector) isenabled.[Side 1]/ [ ] Exit mode.[S] Exit mode.[A][B] Increase/decrease the digit number,Squelch Level confirmation[C] Increase/decrease the digit number,Squelch Level confirmation[Side 2]/ [!][0] - [9][*] Exit mode.[#]PTT switch Exit PTT Mode and transmission.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180Squelch Level keyThe [S] keyThe " " icon appears and current squelch level also appears.Signaling is defeated while the squelch level is configured.[ ]/ [ ], SelectorPress [ ] or turn Selector clockwise to increase the squelch level.Press [ ] or turn Selector counterclockwise to decrease the squelch level.
