22 FLEETSYNC108 Function Reference Version: 1.11# When the Short Message is properly sent to thereceiving party:“COMPLETE” appears on the display.# When the Short Message is not properly sentto the receiving party:“NO REPLY” appears on the display.# When the Short Message is not sent properlysince the receiving party is Busy:“BUSY” appears on the display.22.4.2 Receiving the Short MessageThis received Short Message data can be transferred inthe following way.Table 22-12 Short Message Output! Transceiver Operation1. The “RECV DATA” appears on the main displaywhen the transceiver starts receiving data.2. “COMPLETE” appears on the display whenreceiving the Short Message. (Individual Call only)TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180Short Message DescriptionLCD DisplayThe received Short Message appearson the LCD.The Status Message appears if theMessage Display Type is “Fixed”. TheStatus Message and Selcall ID appearsalternatively every second if theMessage Display Type is “Alternate”.Alert Tone Alert Tone sounds when receiving theShort Message.PC CommandThe received Short Message is sent viaserial command. This message is sentwhen the transceiver is connected to aPC or the KDS-100 (MDT).TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180
