Version: 1.11 Function Reference 13924 EMERGENCY MODE24.1.11 Emergency Key Delay TimeYou can configure the duration from the time when the PFEmergency key is pressed to the time when thetransceiver enters the Emergency Mode. The transceiverenters the Emergency Mode when the PF Emergencykey is pressed for the Emergency Key Delay Time. Thisdelay time prevents the transceiver from unintentionallyentering this mode.You can configure the Emergency Key Delay Time usingKPG-89D.! Configuration using KPG-89D• Configuring the Emergency Key Delay Time(Refer to FPRG 6.14.11. Emergency Key DelayTime.)24.1.12 Emergency Mic SenseYou can configure the microphone gain of the transceiverin the Emergency Mode using KPG-89D. (Refer to 1.12Mic Sense Control.)! Configuration using KPG-89D• Configuring the Emergency Mic Sense function(Refer to FPRG 6.14.12 Emergency Mic Sense.)24.1.13 Locator ToneYou can configure the volume level of the Locator Tonewhen the transceiver is in the Emergency Mode.You can configure the Locator Tone using KPG-89D.Table 24-6 Locator Tone OperationNote: The transceiver does not emit the Locator Tone when theEmergency Mode Type is “Silent”.! Configuration using KPG-89D• Configuring the Locator Tone (Refer to FPRG6.7.2 Common-Page 2 tab - Locator Tone.)24.1.14 Emergency LEDThis function allows the transceiver to turn On the TXLED and BUSY LED when the transceiver transmits inthe Emergency Mode.You can configure the LED to light using KPG-89D.! Configuration using KPG-89D• Configuring the Emergency LED (Refer to FPRG6.14.3 Emergency LED.)24.1.15 Background TransmissionThis function allows the transceiver to include with thetransmitted voice a 1630 Hz tone emitted every second inthe Emergency Mode.The transceiver does not mute since the tone istransmitted with lower deviation than the voice. Thereceiving party can easily recognize that the caller is inEmergency Mode since the tone is extended during voicecommunication.You can configure the Background Transmission usingKPG-89D.! Configuration using KPG-89D• Configuring the Background Transmission (Referto FPRG 6.14.14 Background Transmission.)24.1.16 Man Down Switch Type(TK-2180/ 3180 only)The Man Down Switch Type must be enabled when theinternal Man Down Switch is installed.You can configure the Man Down Switch Type usingKPG-89D.! Configuration using KPG-89D• Configuring the Man Down Switch Type (Refer toFPRG 6.14.15 Man Down Switch Type.)24.1.17 Man Down Delay Time(TK-2180/ 3180 only)The Man Down Delay Time is the duration from the timewhen the Man Down Switch is switched On to the timewhen the Man Down Switch is enabled.The transceiver enters the Emergency Mode when theMan Down Switch is enabled after this timer expires. Youcan use the Man Down Delay Time to prevent theEmergency function from being activated unintentionally.You can configure the Man Down Delay Time using KPG-89D.Locator Tone OperationOff The transceiver does not emit theLocator Tone.0 - 31You can fix the volume level of theLocator Tone. Higher values resultin greater volume.CurrentThe transceiver configures theLocator Tone volume in conjunctionwith the Volume Control.SelectableThe tone volume varies inconjunction with the PF FixedVolume key.