52 Function Reference Version: 1.1116 CONVENTIONAL GROUPThe Conventional Groups are groups of Simplex andSemi-duplex Conventional Channels.You can configure the Zone to the Conventional Groupusing KPG-89D.16.1 ZoneYou can configure the following functions to the Zoneusing KPG-91D.• Zone Name• Data Zone-CH/GID• Home Channel• Home Channel Operator Selectable• Optional Signaling Decode Condition• Audio Control• Time-out Timer (TOT)• TOT Pre-alert• TOT Rekey Time• TOT Reset Time• BCL Override• Zone Add• Scan List16.1.1 Zone NameThe Zone Name function allows you to assign a name toa Zone. (Refer to 3.6.1 Zone Name.)You can configure the Zone Name using KPG-89D.! Configuration using KPG-89D• Configuring the Zone Name (Refer to FPRG 6.2.1Zone Name.)16.1.2 Data Zone-CH/GIDThis function is used to separate the CH/GID for Datacommunications from the CH/GID for Voicecommunications. (Refer to 25.1.2 Data Zone-CH/GID.)You can configure the Data Zone-CH/GID using KPG-89D.! Configuration using KPG-89D• Configuring the Data Zone-CH/GID (Refer toFPRG 6.2.2 Data Zone-CH/GID.)16.1.3 Home ChannelThis function allows you to jump to the frequently usedChannel with a press of the key. (Refer to 2.7 Home CH/GID.)You can configure the Home Channel using KPG-89D.Note: You can only jump to the Channel in the same Zone.! Configuration using KPG-89D• Configuring the Home Channel (Refer to FPRG6.2.3 Home Channel.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)16.1.4 Home Channel OperatorSelectableThis function allows the user to configure the HomeChannel. When this function is enabled, you can changethe Home Channel by selecting the channel to beconfigured as the Home Channel and pressing andholding the PF Home CH/GID key for more than 3seconds.You can enable/disable this function using KPG-89D.! Configuration using KPG-89D• Configuring the Home CH Operator Selectablefunction (Refer to FPRG 6.2.4 Home ChannelOperator Selectable.)16.1.5 Optional Signaling DecodeConditionYou can select Carrier Decode or QT/DQT Decode as theDecode condition.You can configure the Optional Signaling DecodeCondition using KPG-89D.! Configuration using KPG-89D• Configuring the Optional Signaling Decodecondition (Refer to FPRG 6.2.5 Optional SignalingDecode condition.)
