Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 9522 FLEETSYNC22.2 Selective Call FunctionThis function allows you to make a call using theFleetSync ID.You can make a call with your own FleetSync ID and thereceiving party’s ID by pressing the PTT switch or the PFExt. PTT (Voice) port after selecting the receiving party’sID. The transceiver unmutes when the receiving partyreceives the FleetSync ID.The caller’s ID appears on the receiving party’stransceiver. The receiving party can respond to the callerby pressing the PTT switch or the PF Ext. PTT (Voice)port while the caller’s ID is displayed.Following Selective Call types are available.Table 22-2 Selective Call Type22.2.1 Making a Selective CallA user can make a Selective Call by selecting the partyfrom the List or using the Manual Dialing function.The user can make a Selective Call by selecting theFleetSync ID registered in the FleetSync ID List. (Referto 22.2.3 ID List.)With the Manual Dialing function, the user can make aSelective Call by directly specifying the FleetSync ID.The call type is decided according to the number of theentered digits.Table 22-3 Call Type in Manual DialingA user can use the Paging Call function to make aSelective Call. This function allows the user to call to theparty without communications with the party.Note:" The Auto Reply Message function does not activate with PagingCalls." A user can make a Supervisor Call only when selecting the partyfrom the List.! Transceiver Operation# Making a Selective Call with the List Selection:1. Press the PF Selcall key or the PF Selcall +Status key.The transceiver enters List Selection Mode.The last used ID Name appears on the display.The lowest number in the ID List appears onthe display at first when the transceiver entersList Selection Mode.Call Type DescriptionIndividual CallThis function is used to make a call to thespecified transceiver.The transceiver acknowledges that thereceived call is the Individual Call whenreceiving the Selective Call having the Fleetand the Unit ID matching your own ID.Group CallThis function is used to make a call toseveral transceivers in the specified Fleet.The transceiver acknowledges that thereceived call is the Group Call whenreceiving the Selective Call having the UnitID configured to “Unit ID” and the sameFleet.Fleet CallThis function is used to make a call to theparty having the FleetSync ID within thesame Fleet.The transceiver acknowledges that thereceived call is the Fleet Call when receivingthe Selective Call having the Unit IDconfigured to “0 (ALL)” and the same Fleet.Supervisor CallThis function is used to make a call to theparty having the same Unit ID in each Fleet.The transceiver acknowledges that thereceived call is the Supervisor Call whenreceiving the Selective Call having the Fleetconfigured to “0 (ALL)” and the same UnitID.Broadcast CallThis function is used to make a call to alltransceivers having the FleetSync ID.The transceiver acknowledges that thereceived call is the Broadcast Call whenreceiving the Selective Call having the UnitID configured to “0 (ALL)” and the Fleetconfigured to “0 (ALL)”.EnteredDigitNumberRange Call Type7-digitfffiiiiThe transceiver recognizes theentered value as Fleet and ID.fff: Fleet: 100 - 349iiii: ID: 1000 - 4999Individual Call4-digitiiiiThe transceiver recognizes theentered value as the ID.iiii: ID: 1000 - 4999Individual Call/Group Call3-digitfffThe transceiver recognizes theentered value as the Fleetfff: Fleet: 100 - 349Fleet Call