Version: 1.11 Function Reference 132 BASIC OPERATIONThe Zone number decreases in steps of 1.• Press and hold the PF Zone Down key formore than one second.The Zone number decreases in steps of 1every 200 ms.! Configuration using KPG-89D• Assigning functions to the PF keys (Refer to 6.8Key Assignment.)2.5 Changing the CH/GIDYou can change the CH/GID using the Selector, the PFZone Up key, and the PF Zone Down key. (Refer to 10Key Assignment.)Although scan pauses if you change the CH/GID numberduring scan, the transceiver resumes scanning in 1second.The unregistered CH/GID number is skipped whenchanging the CH/GID number.The Rollover Tone beeps when the CH/GID Numberreaches at the lowest number.! Transceiver Operation# Using the Selector• Turn the Selector clockwise.The CH/GID number increases in steps of 1.• Turn the Selector counterclockwise.The CH/GID number decreases in steps of 1.# Using the PF keys• Press the PF CH/GID Up key.The CH/GID number increases in steps of 1.• Press and hold the PF CH/GID Up key for morethan one second.The CH/GID number increases in steps of 1every 200 ms.• Press the PF CH/GID Down key.The CH/GID number decreases in steps of 1.• Press and hold the PF CH/GID Down key formore than one second.The CH/GID number decreases in steps of 1every 200 ms .! Configuration using KPG-89D• Assigning functions to the PF keys (Refer to 6.8Key Assignment.)2.6 Channel EntryThis function allows you to directly change the CH/GIDnumber.You can specify the CH/GID number in the current Zoneby entering numbers after pressing the Channel Entrykey.The transceiver automatically recognizes the highestchannel number. You can enter the digit number andspecify the channel.• Transceiver Operation# When the Maximum Channel Number is ThreeDigits Number:1. Press the PF Channel Entry key.The transceiver enters Channel Entry Mode.2. Enter the Channel number.To enter channel 250, press [2], [5], and [0].3. To enter channel 90, press [0], [9], and [0].To enter channel 7, press [0], [0], and [7].# When the maximum channel number is two digitsnumber:1. Press the PF Channel Entry key.The transceiver enters Channel Entry Mode.2. Enter the Channel number.To enter channel 90, press [9] and [0].To enter channel 07, press [0] and [7].# When the maximum channel number is one digitnumber:1. Press the PF Channel Entry key.The transceiver enters Channel Entry Mode.2. Enter the Channel number.To enter channel 7, press [7].