16 CONVENTIONAL GROUP54 Function Reference Version: 1.1116.2 ChannelYou can configure the following functions relating to theConventional Group Channel using KPG-89D.• Receive Frequency• Transmit Frequency• QT/DQT Decode• QT/DQT Encode• Channel Name• Transmit Power• Wide/Narrow• Optional Signaling• Busy Channel Lockout• PTT ID• Beat Shift• Scan Add• Compander• Data• Voice Scrambler• Scrambler Code16.2.1 Receive FrequencyYou can configure the receive frequency using KPG-89D.! Configuration using KPG-89D• Configuring the Receive Frequency (Refer toFPRG 6.3.3 Receive Frequency.)16.2.2 Transmit FrequencyYou can configure the transmit frequency using KPG-89D.! Configuration using KPG-89D• Configuring the Transmit Frequency (Refer toFPRG 6.3.4 Transmit Frequency.)16.2.3 QT/DQT DecodeThis function allows you to configure the QT/DQT decodecode. QT/DQT is the Signaling for facilitatingcommunication within a Group when sharing the samechannel with several groups (Talk Group). (Refer to 18.1QT/DQT Decode/Encode.)You can configure the QT/DQT Decode code to eachchannel using KPG-89D.! Configuration using KPG-89D• Configuring the QT/DQT Decode (Refer to FPRG6.3.5 QT/DQT Decode.)16.2.4 QT/DQT EncodeThis function allows you to configure the QT/DQT Encodecode. QT/DQT is the Signaling for facilitatingcommunication within a Group when sharing the samechannel with several groups (Talk Group). (Refer to 18.1QT/DQT Decode/Encode.)You can configure the QT/DQT Encode code to eachchannel using KPG-89D.! Configuration using KPG-89D• Configuring the QT/DQT Encode (Refer to FPRG6.3.6 QT/DQT Encode.)16.2.5 Channel NameThis function allows you to assign a name to a Channel.(Refer to 3.6.3 Channel Name.)You can configure the Channel Name using KPG-89D.! Configuration using KPG-89D• Configuring a Channel Name (Refer to FPRG6.3.7 Channel Name.)16.2.6 Transmit PowerTransmit Power is the transmission power of thetransceiver. You can select Low when a repeater or thereceiving party is nearby.This will extend the operating time of TK-2180/ 3180becomes longer.Press the PF Low Transmit Power key to switch thetransmit power (High/Low) of the transceiver.You can configure the Transmit Power using KPG-89D.Note: You can configure the PF Low Transmit Power key only inTK-2180/ 3180.! Configuration using KPG-89D• Configuring the Transmit Power (Refer to FPRG6.3.8 Transmit Power.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)