19 OST76 Function Reference Version: 1.1119.4 OST TableThis function allows you to configure QT/DQT Decode/Encode pair for OST. You can configure a maximum of40 pairs. You can configure the following functions in theOST Table.Table 19-1 OST Table Configuration! Configuration using KPG-89D• Configuring a OST Name (Refer to FPRG 6.7.4Conventional tab - OST Name.)• Configuring the QT/DQT Decode (Refer to FPRG6.7.4 Conventional tab - QT/DQT Decode.)• Configuring the QT/DQT Encode (Refer to FPRG6.7.4 Conventional tab - QT/DQT Encode.)19.5 Standard QTYou can configure the 39 tones specified in EIA-603.! Configuration using KPG-89D• Automatically configuring the Standard QT (Referto FPRG 6.7.5.Conventional tab - Standard QTbutton.)OST Table FunctionOST NameYou can assign name to the OSTQT/DQT Encode/Decode pair. Youcan enter a maximum of 12characters.“TONE 1” - “TONE 40” appearswhen no OST Name is configured.QT/DQT DecodeYou can configure the QT/DQTDecode code. The following QT/DQT Decode range is available.QT: 67 - 254.1 Hz/ in steps of 0.1 HzDQT: 000N - 777N, 000I - 777IQT/DQT EncodeYou can configure the QT/DQT tomake a call. The following QT/DQTEncode range is available.QT: 67 - 254.1 Hz/ in steps of 0.1 HzDQT: 000N - 777N, 000I - 777I