18 Function Reference Version: 1.113 DISPLAYThe transceiver has the following display and indicator.LED (TX/Busy)LCD DisplayBacklight3.1 BUSY LEDThe BUSY LED lights green when receiving thefollowing signals.• Receiving a carrier in the Conventional Group• Receiving Data in PC Mode, FirmwareProgramming Mode and Clone Mode.You can configure the Busy LED to light whenreceiving a carrier in Conventional Group using KPG-89D.You can configure the TX LED and BUSY LED to lightto communicate in Emergency Mode using KPG-89D.! Configuration using KPG-89D• Configuring the Busy LED to light (Refer to6.7.4 Conventional tab ñ Busy LED.)• Configuring the TX LED and the Busy LED tolight in Emergency Mode (Refer to 6.14.3Emergency LED.)3.2 TX LEDThe TX LED lights red when transmitting in thefollowing situations.• Transmitting in Conventional Group and TrunkingSystem• Transmitting Data in PC Mode, FirmwareProgramming Mode, or Clone Mode.You can configure the TX LED and the BUSY LED tolight to communicate in Emergency Mode using KPG-89D.! Configuration using KPG-89D• Configuring the TX LED and the Busy LED tolight in Emergency Mode (Refer to 6.14.3Emergency LED.)3.3 LCD DisplayThe LCD Display of the transceiver is as follows.! TX-2180/3180図 3-1 TK-2180/3180 LCD! TX-7180/8180図 3-2 TK-7180/8180 LCD! Available characters for the MainDisplay and the Sub Display図3-3 Available characters for the Main Display and theSub Display3.3.1 Backlight(TK-2180/3180 only)The backlight LEDs are located behind the LCD andthe Keypad. You can see the LCD using the backlightin dark places or at the night.Press the PF Backlight key to light the backlight LED.
