1 BASIC FUNCTION8 Function Reference Version: 1.11Note:" This function is only available for the TK-2180/ 3180." You can use this function when the TK-7180/ 8180 uses theMicrophone with 12/16 keys.! Configuration using KPG-89D• Configuring the Keypad Operation (Refer to 6.8.2General Tab - Keypad Operation.)1.11 Call KeyThis function allows you to transmit FleetSync, Status, 2-tone, or DTMF code with a single operation.You can directly transmit Status, 2-tone, and DTMF codesconfigured with KPG-89D by pressing one of the PF Call1 - Call 6 keys. The timing to transmit FleetSync, 2-tone,and DTMF codes vary depending on the parameters ofFleetSync, 2-tone, and DTMF. The FleetSync code istransmitted to the target Fleet/ID.You can assign functions to the PF Call 1 to PF Call 6keys using KPG-89D.! Configuration using KPG-89D• Configuring the Call key (Refer to 6.8.7 Call tab.)1.12 Mic Sense ControlThis function allows you to adjust the Mic Gain inEmergency Mode and the input terminal, such asExternal PTT.You can switch the Mic Sense Control between Normaland High level. There is a 4 dB gain difference betweenthe Normal level and High level.You can configure the Mic Sense Control using KPG-89D.Note: You can only configure External PTT (Voice) to the TK-7180/8180.! Configuration using KPG-89D• Configuring the Mic Sense function (Refer to6.7.1 Common-Page 1 tab - Mic Sense.)• Configuring the Emergency Mic Sense function(Refer to 6.14.12 Emergency Mic Sense.)• Configuring the Mic Sense (External PTT (Voice))(Refer to 6.15.3 AUX tab - Mic Sense.)DTMF (Autodial)You can directly select and transmit theDTMF code by pressing the keypad ofthe transceiver.You can select the Autodial Listconfigured with KPG-89D.You can also select and transmit theDTMF code when the Store & Sendfunction is enabled.You can perform the same operation bypressing the PF Autodial key.DTMF (Keypad AutoPTT)You can directly transmit the DTMF codeby pressing the keypad of thetransceiver.FleetSync (Selcall)You can make a FleetSync Selcall bypressing the keypad of the transceiver.You can select the Selcall Listconfigured with KPG-89D and make aSelCall.You can enter and transmit the SelcallID code when the Manual Dialingfunction is enabled.You can perform the same operation bypressing the PF Selcall key.FleetSync (Status)You can transmit the FleetSync Statusby pressing the keypad of thetransceiver.You can select the Status List configuredwith KPG-89D and transmit the status.You can enter and transmit the Statusdata number code when the ManualDialing function is enabled.You can perform the same operation bypressing the PF Status key.FleetSync(Selcall + Status)You can transmit the FleetSync Selcall +Status by pressing the keypad of thetransceiver.You can select the Selcall List/StatusList configured with KPG-89D and makea SelCall.You can enter and transmit the Selcall/Status code when the Manual Dialingfunction is pressed.You can perform the same operation bypressing the PF Selcall + Status key.Configuration Operation