Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 6117 LTR TRUNKING17.2 Group IDYou can configure the following functions to the LTRTrunking System Group ID using KPG-89D.• Encode/Decode ID• GID Name• Transmit Power• Optional Signaling• PTT ID• Call Indicator• Horn Alert (TK-7180/ 8180 only)• Scan Add• Transpond• Talk Around• Compander• Data• Scrambler• Scrambler Code17.2.1 Encode/ Decode IDThe Encode ID is the LTR ID used to transmit.The Decode ID is the LTR ID used to open the squelchand then allows a user to communicate.The transceiver communicates within a Group using thesame LTR ID.You can configure the Encode/ Decode ID using KPG-89D.! Configuration using KPG-89D• Configuring the Encode ID (Refer to FPRG 6.6.3Encode ID.)• Configuring the Decode ID (Refer to FPRG 6.6.4Decode ID.)17.2.2 GID NameThis function allows you to assign a name to a Group ID.(Refer to 3.6.4 GID Name.)You can configure the GID Name using KPG-89D.! Configuration using KPG-89D• Configuring a GID Name (Refer to FPRG 6.6.5GID Name)17.2.3 Transmit PowerTransmit Power is the transmission power of thetransceiver. (Refer to 1.4 Transmit Output Power.)Press the PF Low Transmission Power key to alternatethe output (High/Low) of the transceiver when using theTK-2180/ 3180.A user cannot change the transmission power manuallyfor the TK-7180/ 8180.You can configure the Transmit Power using KPG-89D.! Configuration using KPG-89D• Configuring the Transmit Power (Refer to FPRG6.6.6 Transmit Power.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)17.2.4 Optional SignalingYou can install the option signaling board to make anindividual call. (Refer to 18.2 Optional Signaling.)You can configure the optional signaling parameters toeach channel using KPG-89D.! Configuration using KPG-89D• Configuring Optional Signaling (Trunking System)(Refer to FPRG 6.6.7 Optional Signaling.)17.2.5 PTT IDThis is the identification code transmitted when the PTTswitch is pressed and/or released. (Refer to 14 PTT ID.)You can configure the timing to transmit the PTT ID usingKPG-89D.! Configuration using KPG-89D• Configuring the PTT ID (Refer to FPRG 6.6.8 PTTID.)17.2.6 Call IndicatorThe call indicator notifies a user that the transceiver hasreceived calls.The user can use this function in noisy environments orwhen he/she is away from the transceiver. The operationof this function varies between the time when receivingthe Group ID and the time when receiving the Fix ID.You can configure the Call Indicator using KPG-89D.