Version: 1.11 Function Reference 4713 TALK AROUNDThis function allows you to communicate to anothertransceiver without using a repeater.13.1 Conventional GroupThis function allows you to transmit on the receivefrequency and Decode Signaling (QT/DQT) configuredfor the selected channel.! Transceiver operation# Enabling the Talk Around Function1. Press the PF Talk Around key if the function isdisabled.The “ ” icon appears and the Talk Aroundfunction is enabled.# Disabling the Talk Around Function1. Press the PF Talk Around key if the function isenabled.The “ ” icon disappears and the Talk Aroundfunction is disabled.Note:" The Talk Around function is disabled when changing the Zone-CH/GID when the Talk Around function is enabled." The Talk Around function is disabled when moving to the datachannel using the DTC or the Data PTT while the Talk Aroundfunction is enabled on the Voice Channel. The Talk Aroundbecomes active when the transceiver moves to the Voicechannel." This function does not work in Emergency Mode.! Configuration using KPG-89D• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)13.2 Trunking SystemWhen the Talk Around function is enabled, you cantransmit on the receive frequency and Encode ID of theHome Repeater of the selected Zone.Figure 13-1 Talk AroundYou can enable/disable this function for each Group IDusing KPG-89D.The “ ” icon appears on the Group ID that Talk Aroundis enabled on. You cannot disable the Talk Aroundfunction using the PF Talk Around key.You can enable/disable the Talk Around function on theGroup ID that the Talk Around function is not enabledusing the PF Talk Around key. You can enable/disablethe Talk Around function for each Zone. (Refer to 13.2.2TA Key.)Note:" The Talk Around function will be automatically disabled when theZone/GID is changed if the Talk Around function is enabled." You can configure to enable/disable the PF Talk Around key foreach Zone.! Transceiver operation# GID that the Talk Around Function is Enabled:1. Select the GID that the Talk Around function isenabled on.The “ ” icon appears and the Talk Aroundfunction is enabled.# GID that the Talk Around Function is Disabled:1. Press the PF Talk Around key.The “ ” icon appears and the Talk Aroundfunction is enabled.2. Press the PF Talk Around key.The “ ” icon disappears and the Talk Aroundfunction is disabled.TK-2180/ 3180TK-7180/ 8180Transceiver 1 Transceiver 2RepeaterTransmitFrequency ATransmitFrequency BTransmit Frequency B