20 DTMF80 Function Reference Version: 1.11! Configuration using KPG-89D• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)20.1.4 Autodial List SelectionThis function allows a user to select the DTMF coderegistered in the Auto Dial Memory List and transmit it.The user can use this function when the Store & Sendfunction is disabled.You can enable/disable the Store & Send function usingKPG-89D.! Transceiver Operation1. Press the PF Autodial key.The transceiver enters the Shortcut Entry Mode ofthe List Selection.The minimum List number appears immediatelyafter the transceiver is turned ON. Otherwise, thepreviously selected List number appears.Select “DTMF (Autodial)” in Key Assignmentwindow > General tab > Keypad Operation todisable the PF Autodial key.2. Select the Autodial List.• CommonPress [B]/ [C].• TK-2180/ 3180 *1Turn Selector.• TK-7180/ 8180 *1Press [ ]/ [ ].*1 When the List Selection Key (Selector) is enabled.3. Press the PTT switch to make a voice call andsend the DTMF code.Press [S2] to send only the DTMF code.! Configuration using KPG-89D• Configuring the Store & Send function (Refer toFPRG 6.10.1 Encode tab - Store & Send.)20.1.5 RedialThis function allows a user to re-transmit the lasttransmitted DTMF code.! Transceiver Operation1. Press the PF Autodial key while the transceiver isin receiving mode.The Autodial List display appears.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180
