Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

9 HORN ALERT38 Function Reference Version: 1.11Table 9-2 Conditions for the Horn Alert to be activated in aConventional Group9.2.2 Trunking SystemIn a Trunking system, you can configure the Horn Alertfunction to each Group ID. Conditions to activate theHorn Alert function are different between when the HornAlert function is configured to the Group ID and when theHorn Alert function is not configured to the ID.When the Horn Alert function is enabled, the HORterminal is activated when receiving an individual call.This terminal operates according to the Horn Alert logicsignal configuration.(Refer to 9.4.1 Horn Alert Logic Signal.)The transceiver performs the pulse operation whenreceiving the Fixed ID. (Refer to 17.1.17 Fix ID.)# When the PF Horn Alert Key is Configured:The Horn Alert function is enabled when the PF HornAlert key is pressed when the Horn Alert function isconfigured to a Group ID. The icon appears when theHorn Alert function is enabled.The Horn Alert function is not enabled even if the PFHorn Alert key is pressed when the Horn Alertfunction is not configured to a Group ID.# When the PF Horn Alert Keys is not Configured:The Horn Alert function is automatically enabled whenthe Horn Alert function is configured to a Group ID.The icon appears.The Horn Alert function is not enabled when the HornAlert function is not configured to a Group ID.Following are the conditions to activate the Horn Alertfunction.Table 9-3 Conditions to Activate the Horn Alert Function ina Trunking System9.3 Horn Alert Operation DuringFleetSync CallThe HOR terminal becomes active when receiving theStatus No. 89 in FleetSync. This function is activatedregardless of a Conventional Group and the TrunkingSystem configurations.9.4 Configuring Horn AlertYou can configure the following items that are linked tothe Horn Alert function using KPG-89D.• Horn Alert Logic Signal• Off-hook Horn Alert• Horn Alert Mode9.4.1 Horn Alert Logic SignalThis function allows you to configure the type of the HORterminal operation when the Horn Alert function isactivated.You can configure the Horn Alert Logic Signal using KPG-89D The following HOR terminal operation is available.Signaling Configuration Conditions toActivate theHorn AlertFunctionAudiocontrolconfigurationQT/DQTDecodeconfigurationOptionalSignalingconfigurationQT/DQT orOptionalsignalingNone None -None Other thannoneCarrier + Optionalsignaling matchOther thannone None -Other thannoneOther thanNoneCarrier + Optionalsignaling matchQT/DQT andOptionalsignalingNone None -None Other thannoneCarrier + Optionalsignaling matchOther thannone None -Other thannoneOther thannoneCarrier + QT/DQT match +Optionalsignaling matchSignaling Configuration Conditionsto Activatethe HornAlertFunctionHorn AlertconfigurationDecode IDConfigurationOptionalSignalingConfigurationDisabledNone None -None Other thanNone -Other thanNone None -Other thanNoneOther thanNone -EnabledNone None -None Other thanNone -Other thanNone None Decode IDOther thanNoneOther thanNoneDecode ID +OptionalSignalingMatch