Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 11322 FLEETSYNC! StatusThe transceiver sends the GPS data with theFleetSync Status Message.Figure 22-2 Timing to Send the GPS Combination (PTT ID)! EmergencyThe transceiver sends the GPS data with theEmergency ID (FleetSync).The GPS data is not added to the DTMF/ANI Board.Following are the ID to be sent and the GPS data.Table 22-15 ID and GPS dataFigure 22-3 Timing for the GPS Combination! Configuration using KPG-89D• Configuring the GPS Combination (PTT ID) (Referto FPRG 6.12.6 GPS tab - GPS Combination (PTTID).)• Configuring the GPS Combination (Status) (Referto FPRG 6.12.6 GPS tab - GPS Combination(Status).)• Configuring the GPS Combination (Emergency)(Refer to FPRG 6.12.6 GPS tab - GPSCombination (Emergency).)• Configuring the PTT ID (Refer to FPRG 6.3.12PTT ID.)• Configuring the Emergency ID (Refer to FPRG6.4.19 Emergency ID.)22.6.3 GPS Report ModeThis function allows you to select the transmissionmethod: Transmit the GPS data automatically or transmitafter receiving the command.You can configure the GPS Report Mode using KPG-89D.The GPS Report Mode has the following functions.Table 22-16 GPS Data Request Configuration! Configuration using KPG-89D• Configuring GPS Report Mode (Refer to FPRG6.12.6 GPS tab - GPS Report Mode.)22.6.4 Number of TimesThis function allows the transceiver to send the GPS datafor the configured times when “Poll” is selected in GPSReport Mode.You can send the GPS data for the configured times atthe interval configured in the GPS Report Interval.You can configure the number of times to send the GPSdata using KPG-89D.! Configuration using KPG-89D• Configuring the Number of Times (Refer to FPRG6.12.6 GPS tab - Number of Times.)EmergencyIDEmergency ID (Emergency Information)None FleetSync DTMF ANIBoard*Check(Enable) - FleetSyncID + GPS DTMF ID ANIUncheck(Disable) - FleetSyncID DTMF ID ANISt GPSReceiveTransmitStatus + GPSID GPS ID GPSEmergency + GPSReceiveTransmitGPS ReportMode FunctionPollThe transceiver sends the GPS data whenreceiving the GPS data transmission requestfrom the base station.This function is used when the base stationcontrols the timing to send the GPS data.This allows a user to avoid transmit collision.AutoThe transceiver sends the GPS data at theinterval configured in the GPS Report Interval.This function is useful for controlling ormonitoring cars as the transceiver frequentlytransmits the position data to the base station.The transceiver sends the GPS data whenreceiving the GPS data transmission requestfrom the base station even if the Auto isselected.