Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 5316 CONVENTIONAL GROUP16.1.6 Audio ControlThis function allows you to configure the conditions todisable the Mute function using the QT/DQT and OptionSignaling. (Refer to 18.3 Signaling (Audio Control).)You can configure the Audio Control function using KPG-89D. You can configure the function to each Zone.! Configuration using KPG-89D• Configuring the Audio Control (Refer to FPRG6.2.6 Audio Control.)16.1.7 Time-out Timer (TOT)This function limits the continuous transmission time(TOT). (Refer to 11 Time-out Timer.)You can configure this period using KPG-89D.! Configuration using KPG-89D• Configuring the Time-out Timer (TOT) (Refer toFPRG 6.2.7 Time-out Timer (TOT).)16.1.8 TOT Pre-alertThis function allows you to notify a user that the Time-outtimer is about to expire. (Refer to 11.1.2 TOT Pre-alert.)You can configure the timing to emit the TOT Pre-alerttone using KPG-89D.! Configuration using KPG-89D• Configuring the TOT Pre-alert (Refer to FPRG6.2.8 TOT Pre-alert.)16.1.9 TOT Rekey TimeThe function is used to configure the duration of the timefrom the time when the Time-out Timer starts operating tothe time when the transceiver starts transmitting again.(Refer to 11.1.3 TOT Rekey Time.)You can configure the TOT Rekey Time using KPG-89D.! Configuration using KPG-89D• Configuring the TOT Rekey Time (Refer to FPRG6.2.9 TOT Rekey Time.)16.1.10 TOT Reset TimeThe TOT Reset Time is the function to reset the Time-outTimer. (Refer to 11.1.4 TOT Reset Time.)You can configure the TOT Reset Time using KPG-89D.! Configuration using KPG-89D• Configuring the TOT Reset Time (Refer to FPRG6.2.10 TOT Reset Time.)16.1.11 BCL OverrideThis function allows the transceiver to transmit data whilethe transceiver channel is busy, even if the transceiver donot normally transmit on a busy channel. (Refer to 12.2BCL Override.)You can enable/disable this function using KPG-89D.! Configuration using KPG-89D• Configuring the BCL Override function (Refer toFPRG 6.2.11 BCL Override.)16.1.12 Zone AddYou can configure the Zone to be added to the Scan Listusing KPG-89D.! Configuration using KPG-89D• Configuring the Zone Add function (Refer to FPRG6.2.12 Zone Add.)16.1.13 Scan ListYou can configure the Scan List according to theconfiguration of the Scan List Table using KPG-89D.! Configuration using KPG-89D• Configuring the Scan List (Refer to FPRG 6.2.13Scan List and FPRG 6.2.15 Scan List Tablewindow.)