20 DTMF84 Function Reference Version: 1.1120.2.9 Store & SendThis function allows a user to store entered DTMF codesusing the Keypad, then transmit them at one time. Youcan send a DTMF string that consists of a maximum of 30digits.You can enable/disable the Store & Send function usingKPG-89D.! Configuration using KPG-89D• Configuring the Store & Send function (Refer toFPRG 6.10.1.Encode tab - Store & Send.)20.2.10 Auto TelephoneYou can enable/disable the Auto Telephone function. Youcan use this function when the [Side 2]/ [!] is pressed inAutodial Mode.You can enable/disable the Auto Telephone functionusing KPG-89D.! Configuration using KPG-89D• Configuring the Auto Telephone function (Refer toFPRG 6.10.1 Encode tab - Auto Telephone.)20.3 DecodeYou can configure the following functions that are linkedto the DTMF Decoder using KPG-89D.• Code• Transpond/ Alert Tone• Stun• Auto Reset Timer• Clear to Transpond• Selective Call Alert LED20.3.1 CodeCode is a standby code for an individual call.The transceiver emits the Alert Tone and the Call AlertLED lights orange when the Code matches. A user cancommunicate only with the QT/DQT according to theselected operation in Decode Response.! Configuration using KPG-89D• Configuring the Code (Refer to FPRG 6.10.2Decode tab - Code.)20.3.2 Transpond/ Alert ToneThe transceiver performs the Transpond/ Alert Tonefunction when the code matches. The selectedoperations in Transpond and Alert Tone is performedwhen the code matches.You can configure Transpond/ Alert Tone using KPG-89D. Below is a list of configuration items for the AlertTone and Transpond.Table 20-4 Transpond/ Alert Tone OperationNote:" The Alert Tone sounds after transponding when using theTranspond function and Alert Tone function at the same time." The Alert Tone is held since the channel is busy whileconfiguring the Clear to Transpond operation." The Alert tone stops when any key is pressed while it isintermittently emitted if “Infinite” is selected in the Special AlertTone window > Cycle edit box “Infinite”. The received tone ispreferred when the Alert Tone is intermittently emitted." The match status of DTMF resets in the following condition.Table 20-5 Condition to Reset the DTMF Match StateFunction OperationAlert Tone The transceiver emits the configured AlertTone.TranspondThe transceiver performs the Transpondfunction. The transceiver overwrites theTranspond Tone and transmits it.Operation ConditionPress a key.One of the following keys is pressed.• PF Monitor key• PF Monitor Momentary key• PF Squelch Off key• PF Squelch Off Momentary key• PF Zone Up key• PF Zone Down key• PF Zone Up/Down key• PF CH/GID Up key• PF CH/GID Down key• PF CH/GID Up/Down key• PF Scan key• PF Home Channel key• PF Direct CH/GID 1 - PF Direct CH/GID 5keyOn-hook The microphone status becomes On-hook.Timerexpires. Auto Reset Timer expires.Codereception Receiving Code + # code