23 SCAN130 Function Reference Version: 1.11# Priority Channel 2The following “ ” icon appears.# Priority Channel 1 and 2The following “ ” icon appears.23.6 Group ScanThis function allows the transceiver to scan all Group IDsin the selected Zone in a Trunking Systems. A user doesnot need to press the PF Scan key to make the GroupScan.The following Group IDs are added to the Scan List.• Group ID that is added using the Scan Add function.• Group ID that is added using the PF Scan Del/AddkeyThe transceiver performs the Group Scan even if theSingle Scan/ Multi Scan/ List Scan Group Scan is madeby pressing the PF Scan key.The scan operations is different between the time whenmaking the automatic Group Scan and the time whenmaking the Group Scan in Scan Mode.• The transceiver does not scan the Priority Channelwhen making the automatic Group Scan.• The transceiver scans the Priority Channel whenmaking the Group Scan in Scan Mode.23.7 Configuring ScanYou can configure the following functions that are relevantto scan using KPG-89D.• Scan Del/Add• Scan List• Scan List Table• Priority1/ Priority 1 Zone-CH• Priority2/ Priority 2 Zone-CH• Revert CH/GID• Dropout Delay Time• Dwell Time• Lookback• Scan Type• AC Control• Priority 1 Temporary Delete/ Add• Priority 2 Temporary Delete/ Add• Off-hook Scan (TK-7180/ 8180 only)• Revert CH/GID Display• CH/GID Recall• Priority Channel Stop Tone• Power-on Scan23.7.1 Scan Del/AddThis function allows a user to add or delete the CH/GID.With this function, the user can reliably receive importantCH/GID by deleting unnecessary CH/GID to improve thescan speed.! Transceiver Operation# Adding/deleting CH/GID to/from the Scan List• Press the PF Scan Del/Add key.The current CH/GID is deleted from the ScanList when it is already configured in the list.The “ ” icon (right) disappears.The current CH/GID is added to the Scan Listwhen it is not configured in the list. The “ ”icon (right) appears.# Adding/deleting Zone to/from the Scan List• Press and hold the PF Scan Del/Add key formore than 1 second.The current Zone is deleted from the Scan Listwhen it is already configured in the list. The“ ” icon (left) disappears.The current Zone is added to the Scan Listwhen it is not configured in the list. The “ ”icon (right) appears.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180
