30 Function Reference Version: 1.115 PASSWORD FUNCTIONThe transceiver has a password function for transceiveroperation and the configuration data.5.1 Transceiver PasswordThis function protects the transceiver from unauthorizedusage. The transceiver works normal when the correctPassword is entered after the transceiver is turned ON.You can configure the password using KPG-89D. Youcan configure a password using any numbers between 0and 999999.You can enter the password using the Mic key on the TK-7180/ 8180 or 12-key keypad of the TK-2180/ 3180. Youcan also enter the password using the Selector or the PFkeys.! Transceiver Operation# Using Mic Keypad or 12-key Keypad1. Use the Mic key or number key on the 12/16-key keypad to enter the password.2. Press [S] or [*] after you complete entering thepassword.The Password Authorization Tone soundswhen the correct password is entered.“PASSWORD” appears on the LCD again whenthe wrong password is entered and thetransceiver returns to Password Entry Mode.# Using the Selector or the PF keys1. Select a number using the Selector or [ ]/[ ].2. Press [C] to select the number.The entered number stops blinking and isconfirmed on the display.3. Repeat the steps 1 and 2 to enter the entirepassword.4. Press [S] or [*] when you complete entering thepassword.The Password Authorization Tone soundswhen the correct password is entered.“PASSWORD” appears on the LCD again whenthe wrong password is entered and thetransceiver returns to Password Entry Mode.Note: Following keys can be used.Table 5-1 Key Operation! Configuration using KPG-89D• Configuring the Transceiver Password (Refer toFPRG 6.7.1 Common-Page 1 tab - TransceiverPassword.)• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)Figure 5-1 Transceiver Password OperationKey Name OperationSelector/ [ ]/ [ ] Increase/decrease the number (0 - 9)[Side 1]/ [ ] The transceiver returns to the“PASSWORD” display.[S] Password Authorization[A] Press: Delete a number.Hold: Delete all numbers.[B][C] Confirm the selected value and thenumber.[Side 2]/ [!][0] - [9] Enter a number.[*] Password authorization[#] Press: Delete a number.Hold: Delete all numbers.PTT switchKey Name OperationThe [C] keyThe [C]The correct password is entered.A wrong passwordis entered.When the Mode ResetTimer expires withoutmaking any operation.Power-onEnter the first digit.Enter the second digit.Confirm the first digit entry.Confirm the second digit entry.Confirm the lowest digit entry.Selector or [ ]/ [ ]