Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

20 DTMF86 Function Reference Version: 1.1120.3.5 Clear to TranspondThis function allows the transceiver to wait beforeperforming the Transpond function until the channel isreleased by another user.You can enable/disable the Clear to Transpond functionusing KPG-89D.Note: This function works only in Conventional Group.! Configuration using KPG-89D• Configuring the Clear to Transpond (Refer toFPRG 6.10.2 Decode tab - Clear to Transpond.)20.3.6 Selective Call Alert LEDThis function makes the SelCall Alert LED blink whenreceiving a code.This function allows a user to monitor a call when he/sheis away from the transceiver.You can enable/disable the Selective Call Alert LED usingKPG-89D. (Refer to 22.2 Selective Call Function.)! Configuration using KPG-89D• Configuring the Selective Call Alert LED (Refer toFPRG 6.10.2 Decode tab - Selective Call AlertLED.)20.4 AutodialYou can configure the following functions that are linkedto Autodial using KPG-89D.• Autodial List• Autodial Programming20.4.1 Autodial ListThis function allows you to configure the DTMF codeused in Autodial function.You can configure the Autodial List using KPG-89D.Below is a list of configuration items for the Autodial List.Table 20-9 Table 20-9 Autodial List Configuration! Configuration using KPG-89D• Configuring the Name (Refer to FPRG 6.10.3 AutoDial List tab - DTMF Name.)• Configuring the Code (Refer to FPRG 6.10.3 AutoDial List tab - Code.)20.4.2 Autodial ProgrammingThis function allows you to configure, change, or deletethe DTMF Autodial List using the PF keys.You can change the Name and the DTMF code bypressing the PF Autodial Programming key.You can enable/disable the Autodial Programmingfunction using KPG-89D.Note: The key is activated as below when the List name or theDTMF code is entered.Table 20-10 Key OperationAutodial List OperationNameYou can assign a name to the DTMFcode. You can enter a maximum of 12characters.CodeYou can enter the DTMF code to send.You can enter a maximum of 16 digitnumbers.Key Name OperationSelector/ [ ]/ [ ] Up/Down of the entered channel[Side 1]/ [ ] Exit Mode.[S] Move to next item.[A] Press: Delete a number.Hold: Delete all numbers.[B][C] Confirm the entered character.[Side 2]/ [!][0] (Space)/ 0[1] 1[2] A/ B/ C/ 2[3] D/ E/ F/ 3[4] G/ H/ I/ 4[5] J/ K/ L/ 5[6] M/ N/ O/ 6[7] P/ Q/ R/ S/ 7[8] T/ U/ V/ 8[9] W/ X/ Y/ Z/ 9[*] Confirm the entered character.[#] Press: Delete a number.Hold: Delete all numbers.PTT switch Exit PTT Mode and transmit.