Version: 1.11 Function Reference 11522 FLEETSYNC22.6.10 GPS Data StorageThis function allows the transceiver to store the FleetSyncGPS data in the VGS-1.The transceiver can store the GPS data at the GPSReport Interval Time. The transceiver can send the GPSdata or it can be read by a PC.You can configure the GPS data to be stored in the VGS-1 using KPG-89D.! Configuration using KPG-89D• Configuring the GPS Data Storage (Refer toFPRG 6.7.6 VGS-1 tab - GPS Data Storage.)22.7 StackThe received Selective Call, Status Message and ShortMessage are stored in the Stack Memory. A user canconfirm or delete the message with the transceiver’soperation.! Transceiver Operation# Confirming the message1. Press and hold the PF Selcall, PF Status, orPF Selcall + Status key for more than onesecond.The transceiver enters Stack Mode.2. Select the message to confirm.• CommonPress [B]/ [C] to increase/decrease theStack List number.• TK-2180/ 3180 *1Turn Selector clockwise to increase theStack List number.Turn Selector counterclockwise todecrease the Stack List number.• TK-7180/ 8180 *1Press [ ]/ [ ] to increase/decrease theStack List number.*1 When the List Selection Key (Selector) isenabled.3. Confirm the message.The message appears on the display.# Selective Call“Inn” appears on the Sub display.The name of the received ID List appears onthe main display.The ID List code appears when the ID Name isnot configured.# Status Message“Snn” appears on the sub display.The received Status Name appears on themain display.TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180TK-2180/ 3180TK-7180/ 8180
