3 DISPLAY20 Function Reference Version: 1.113.4.1 Signal Strength IndicatorThis function allows you to display the transceiver'sinformation.When this function is enabled, the signal strength ofthe receive signal appears.表 3-2 Signal StatusNote: The signal strength in room temperature is used as theindication.3.4.2 Battery Status/Warning(TK-2180/3180 Only)This function notifies and warns the battery'sremaining status to the user.The battery status is displayed in 4 levels when thisfunction is enabled.With this function enabled, the transceiver emits theBeep or displays the warning when the battery voltagelevel becomes low.You can enable/disable this function using KPG-89D.表 3-3 Battery Status Icon List表 3-4 Battery Warning OperationNote:" The status of the alkaline batteries cannot be displayed." Select "Always" or "Always w/beepî in the While transmittingconfiguration.! Configuration using KPG-89D• Configuring the Battery Status (Refer to 6.7.3Common-Page 3 tab - Battery Status.)• Configuring the Battery Warning (Refer to 6.7.3Common-Page 3 tab - Battery Warning.)• AUX B/VOX iconThe status of the AUX B is displayed forthe TK-7180/ 8180 and the status of theVOX function is displayed for the TK-2180/3180.• Operator Selectable Tone iconThis icon displays the status of theOperator Selectable Tone.• Auto Recording iconThis icon displays the status of the AutoRecording function.• Auto Reply Message iconThis icon is displayed in Auto ReplyMessage Mode .• Battery Indicator iconThis icon displays the status of theBattery Indicator. This icon appearsonly when using the TK-2180/3180.Icon Status Signal Strength (dBm)TK-2180/3180 TK-7180/8180High -80 - -74 -Medium -95 - -80 -92 - -74Low -110 - -95 -110 - -92VeryweakCarrier exits.-110Carrier exits.-110None No signal No carrier No carrierIcon Function(Middle)(Right)(Left)(Right)Icon StatusHighSufficientLowVery LowBattery Warning OperationOffYou can transmit regardless of theBattery voltage and the Battery warningdisplay does not appear.While transmitting The TX LED blinks red whiletransmitting.Always The TX LED blinks red whiletransmitting.Always w/beepThe TX LED always blinks red and thetransceiver emits the Battery WarningTone.