Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

Version: 1.11 Function Reference 399 HORN ALERTTable 9-4 Horn Alert Logic Signal OperationNote:" The HOR terminal is not disabled even when the match status ofthe DTMF/2-tone resets while the Horn Alert Logic Signal time islonger than the Auto Reset Timer of DTMF or 2-tone. The HornAlert Port is disabled when the duration configured for the HornAlert Logic Signal expires." The Horn Alert operation pauses when pressing the PF HornAlert key while the Horn Alert function is active. In this case, theHorn Alert function is also disabled." The Horn Alert operation pauses when changing the Zone-CH/GID while the Horn Alert function is active. The Horn Alert theHorn Alert function is not disabled." When selecting “Until Reset” in the Horn Alert Logic Signalfunction, the Horn Alert function is disabled with the followingconditions while the Horn Alert function is operating with thematch status of the ID in Trunking System.• Press the PF Horn Alert key.• Changing the Mic Hook status• Changing the Zone-CH/GID! Configuration using KPG-89D• Configuring the Horn Alert Logic Signal (Refer toFPRG 6.7.1 Common-Page 1 tab - Horn AlertLogic Signal.)9.4.2 Off-hook Horn AlertThis function allows you to configure the Horn Alertfunction to operate in conjunction with the Mic hookstatus.You can configure the Off-hook Horn Alert function usingKPG-89D. The following conditions must be configuredto activate the Horn Alert function.! DTMF/2-toneTable 9-5 Conditions to Activate the Horn Alert Functionwith DTMF/2-tone! FleetSyncTable 9-6 Conditions to Activate the Horn Alert Functionwith FleetSync(Receiving Status No. 89)! Configuration using KPG-89D• Configuring the Off-hook Horn Alert function(Refer to FPRG 6.7.1 Common-Page 1 tab - Off-hook Horn Alert.)Configuration DescriptionPulseThe HOR terminal becomes activefor 3 times every 500 ms.The HOR terminal activates (1sActive, 500 ms, and Inactive 1 sActive) when receiving the Fix ID.ContinuousWhen the function is configured for“Until Reset”, the Horn Alert terminalremains active until the OptionSignaling match status resets.When the duration is configuredbetween 1 s - 30 s, the HORterminal remains active until theconfigured duration expires. Off-hook HornAlertconfigurationHorn AlertconfigurationStatus of thehook (On/Off)Horn AlertfunctionOffOff Off DisabledOn DisabledOn Off DisabledOn EnabledOnOff Off DisabledOnOn Off EnabledOnOff-hook HornAlertConfigurationHorn AlertConfigurationStatus of theHook (On/Off)Horn AlertFunctionOffOff Off DisabledOn EnabledOn Off DisabledOn EnabledOnOff OffEnabledOnOn OffOn