Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

44 Function Reference Version: 1.1111 TIME-OUT TIMERThis function restricts the continuous transmission time(TOT).This function prevents the user from occupying a repeaterfrequency for a long period of time when the repeater isshared with other users. The transceiver stopstransmitting when it is continuously transmitting longerthan the configured time.You can configure the Time-out Timer to each Zone. Theoperation of this function varies between a ConventionalGroup and a Trunking System.11.1 Conventional GroupYou can configure the following items in a ConventionalGroup.• Time-out Timer• TOT Pre-alert• TOT Rekey Time• TOT Reset Time11.1.1 Time-out TimerThis function restricts the continuous transmission time(TOT).You can configure this period using KPG-89D.Note: This function does not operate in Emergency Mode.! Configuration using KPG-89D• Configuring the continuous transmission time(Refer to FPRG 6.2.7 Time-out Timer (TOT).)11.1.2 TOT Pre-alertThis function allows the transceiver to notify a user thatthe transmission timer is about to expire. The transceiveremits the TOT Pre-alert tone when the timer expires.You can configure the timing to emit the TOT Pre-alerttone using KPG-89D.Note: The TOT Pre-alert tone is only emitted while transmitting.This tone is not emitted while the transmission pauses withinthe TOT Reset Time. (Refer to 11.1.4 TOT Reset Time.)! Configuration using KPG-89D• Configuring the TOT Pre-alert Tone (Refer toFPRG 6.2.8 TOT Pre-alert.)11.1.3 TOT Rekey TimeThe function is used to configure the time from when theTime-out Timer starts operating to the time when thetransceiver starts transmission again. This function isused to temporarily restrict the transmission when a useroccupies the repeater or the frequency for a long time.You can configure the TOT Rekey Time using KPG-89D.Note:" TOT Rekey Time is disabled when the transceiver is turned ONor OFF during the TOT Rekey Time." The TOT Rekey Time is reset when the following key is pressed.• PF Zone Up key• PF Zone Down key• PF Zone Up/Down key• PF CH/GID Up key• PF CH/GID Down key• PF CH/GID Up/Down key• PF Home CH/GID key• PF Direct CH/GID - Direct CH/GID 6 key! Configuration using KPG-89D• Configuring the TOT Rekey Time (Refer to FPRG6.2.9 TOT Rekey Time.)11.1.4 TOT Reset TimeThe TOT (Time-out Timer) Reset Time is the period toreset the Time-out Timer.When a user re-transmits within the TOT Reset Time, it iscounted as a continuous transmission. This functionprevents a user from occupying a repeater or frequencyfor a long time with transmitting intermittently.You can configure the TOT Reset Time using KPG-89D.Note: The TOT Rekey Time is reset when the following key ispressed.• PF Zone Up key• PF Zone Down key• PF Zone Up/Down key• PF CH/GID Up key• PF CH/GID Down key• PF CH/GID Up/Down key• PF Home CH/GID key• PF Direct CH/GID - Direct CH/GID 6 key! Configuration using KPG-89D• Configuring the TOT Reset Time (Refer to FPRG6.2.10 TOT Reset Time.)