Kenwood TK-3180 Function Reference

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

Contents

23 SCAN126 Function Reference Version: 1.1123.1.4 Manually Changing the Zone-CH/GID during ScanThe transceiver performs the following operation whenchanging the Zone-CH/GID while the following windowappears.Table 23-1 Operations after Changing the Zone-CH/GIDThe transceiver performs the following operation whenthe PF Home CH/GID key is pressed during scan.Table 23-2 Operations after the PF Home CH/GID Key isPressedThe transceiver performs the following operation whenthe PF Direct CH/GID 1 - 5 key is pressed during scan.The operation of the transceiver varies depending on theconfiguration of the Return function. Operations after thePF Direct CH/GID Key is Pressed23.1.5 Operations when ManuallyChanging the Zone-CH/GIDwhile Scan Pauses to ReceiveThe transceiver performs the following operation whenmanually changing the Zone-CH/GID while scan pausesto receive.• The transceiver pauses on the Selected CH/GID whenthe CH/GID that scan pauses is different from theSelected CH/GID.23.1.6 Operations during Scan inConventional GroupThe transceiver performs the following operationaccording to the configuration in the Zone Edit window(Conventional Group) > Audio Control.! QT/DQT FunctionThe transceiver pauses scan when the received QT/DQT matches on each channel. The Dropout DelayTime activates when the received QT/DQT does notmatch the configured QT/DQT. The transceiverresumes scan after the Dropout Delay Time expires.The transceiver transmits using the Revert Channelwhen the PTT switch is pressed. The transceiveractivates the Dwell Time when the transmission ends,then resumes scan after the Dwell Time expires.! QT/DQT - Optional Signaling AND FunctionThe transceiver pauses scan when the received QT/DQT matches. The transceiver mutes and waits forreceipt of the Optional Signaling.The transceiver resumes scan after the Dropout DelayTime expires when the QT/DQT does not match theconfigured QT/DQT while waiting for receiving theOptional Signaling.The transceiver unmutes by performing Alert/Transpond when the QT/DQT matches the configuredQT/DQT while waiting for receipt of the OptionalSignaling. The transceiver stands by on the channelwhen the Optional Signaling matches.! QT/DQT - Optional Signaling OR FunctionDisplay OperationScan The transceiver scans using the Selected CH/GID.It resumes scan after the Key Dwell Time expires.RevertCH/GIDThe transceiver pauses scanning on the selectedCH/GID when the Revert CH/GID is different fromthe selected CH/GID.ScanType OperationScanTypeThe transceiver pauses on the Home CH/GID. TheLookback function of the Priority Scan will not beactivated.The transceiver returns to the selected channel andresumes scan when the PF Home CH/GID key ispressed again.The Scan Stop Tone sounds every 5 seconds whenscan pauses.SingleScanThe transceiver moves to the Home CH/GID in theSelected Zone.The Selected Channel is not changed.MultiScanThe transceiver moves to the Home CH/GID in theRevert Zone.The Selected Channel is not changed.Return OperationDisabled• The transceiver pauses scan using the DirectCH/GID 1 - 5 key.The transceiver resumes scan from the Direct CH/GID after the Key Dwell Time expires when nosignal is detected. The same operation is madewhen using Priority Scan.• If the Direct CH/GID 1 - 5 is the channel and thePriority is configured to “Selected”, the Direct CH/GID 1 - 5 becomes the Priority Channel.• If the Revert Channel is configured to “Selected”,the Revert Channel becomes Direct CH/GID 1 - 5.EnabledThe transceiver pauses scanning using the DirectCH/GID 1 - 5 key. The Lookback function of thePriority Scan will not be activated.The transceiver returns to the selected channel andresumes scan when the PF Direct CH/GID key ispressed again. The Scan Stop Tone sounds every5 seconds while scan pauses.Return Operation