Workgroup Remote Access Switch 121CONFIGURING B ASIC IP ROUTINGIP Network InterfacesIn the previous graphic, the WAN network interface 1.1.1.1 on SITE1 is used to connect to adedicated line and an ISDN line. You need to specify to which remote device, either SITE2 or SITE3,SITE1 should exchange RIP packets. If it is necessary to run the RIP between SITE1 and SITE3 aswell as between SITE1 and SITE2, then another WAN network interface (for example, 2.1.1.1 onSITE1 and 2.1.1.3 on SITE3) must be configured, as illustrated:1.1.1.21.1.1.11.1.1.3DedicatedConnectionISDNCSX1200CSX5500CSX1200ZPOWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1DPOWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1D1.1.1.21.1.1.1DedicatedConnectionISDN2.1.1.12.1.1.3ZCSX1200CSX1200CSX5500POWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1DPOWER SERVICE TX RX 10BASE - TLAN B-CHANNELS E1 ONLYB2 B4 B6 B8 B26 B28B22 B24B18 B20B14 B16B10 B12 B30 L1B1 B3 B5 B7 B25 B27B21 B23B17 B19B13 B15B9 B11 B29 B31E1D T1D"SITE1""SITE2""SITE3"
