Cabletron Systems CSX1200 User Manual

Also see for CyberSWITCH CSX1000: User guide Quick start

Contents

Workgroup Remote Access Switch 81U PGRADING S YSTEM SOFTWAREReturn Configuration to Factory Defaults3. Change the admin and guest system passwords.If your system was previously accessed by your distributor, the preconfigured password willbe admin (in lower case). Change this password to secure your system. To make this change,enter the following command at the system prompt:pswdThen follow the prompts to enter a new password. Your password must be a 3 to 16 nonblankcharacter string. Be careful, passwords are uppercase and lowercase sensitive.R ETURN CONFIGURATION TO FACTORY D EFAULTSThe default configuration files are located on the CSX1200 CD. If you wish to return to thedefault configuration, download the DEFLTCFG.OSW file. Follow the same steps for Local orRemote Upgrade except download the file DEFLTCFG.OSW instead of the UPGRADE.OSW file.A CCESSING THE R ELEASE N OTESThe Release Notes provide release highlights and important information related to this release thatshould be reviewed before you begin the system’s installation and configuration.The Release Notes are located on CD as well as on the system’s FLASH file system.The Release Notes on CD are located in the REL_NOTE.TXT file. This file is a DOS text file you canread on a DOS machine. Insert the CD into the drive, change to the proper directory, and enter thefollowing command at the DOS prompt:[CD-ROM drive]:\[platform directory][ISDN standard directory][option directory]> typeREL_NOTE.TXT | moreFor example, if your CD-ROM is designated as drive D, you are installing a CSX1204, using USISDN standards and the IP/IPX option, you would use the following path:D:\CSX1204\US\IPIPX> type REL_NOTE.TXT | more